REPEAT/
PROGRAM
MODE/OSC
e
PLAY/PAUSEr, t
SKIP/SEARCH
sSTOP/BAND
PROGRAMMED PLAY
Up to 16 tracks can be programmed from the disc.
1 In stop mode, press PROGRAM.
2 Press r, t to select a track, then press PROGRAM to store it.
Track number
Specifications
Tuner section
Frequency range, antenna – FM: 87.5 - 108.0 MHz Rod
antenna, AM: 530/531 - 1,710/1,602 kHz (10/9 kHz step) Ferrite bar antenna
Deck section
Track format – 4 tracks, 2 channels / Frequency range
–Normal tape: 50 - 12,500 Hz (EIAJ) / Recording system – AC bias / Erasing system – Magnet erase / Heads – Recording/playback head (1), Erasure head
(1)
CD player section
Disc – Compact disc / Scanning method –
General
Speaker – 100 mm cone type (2) / Power output –
2 W + 2 W (EIAJ 8 ohms, T.H.D. 10% DC) / Power requirements – DC 12 V using eight size C (R14) batteries, AC 120 V, 60 Hz / Power consumption – 12 W / Dimensions (W ⋅ H ⋅ D) – 390 ⋅ 167 ⋅ 255.5 mm / Weight (excluding batteries) – 2.7 kg / Accessory – Remote control (1,
Specifications and external appearance are subject to change without notice.
Program number
3 Repeat step 2 to program other tracks.
4 Press s to finish the program.
Total number of
the programmed tracks
5 Press e to start play.
To check the program, press r or t in stop mode.
To clear the program, hold down PROGRAM in stop mode until the display changes.
To change the programmed tracks, clear the program and repeat all the steps again.
COPYRIGHT |
|
|
| En | |
Please check the copyright laws relating to |
| |
recordings from disc, radio or external tape for the |
|
|
country in which the machine is being used. |
|
|
|
|
|
If an erroneous display or malfunction occurs
Select CD function first. Hold down s and press e. If the unit cannot be reset in the way above, disconnect the AC cord and remove all the batteries to turn off the display.
Leave the unit for a while and turn the power back on.
ENGLISH 9