Power supply
Using on AC house current
Connect the AC cord as illustrated below.
to the AC inlet of the unit
supplied AC cord
to an AC outlet (AC 120 V, 60 Hz)
CAUTION
Use only the supplied AC cord. Use with other cords may result in the risk of fire.
Using on batteries
Open the lid of the battery compartment on the rear and insert eight R14 (size C) batteries, not supplied, with the 0 and 9 marks correctly aligned. Then close the lid.
To switch from AC power supply to battery power supply, disconnect the AC cord from the AC inlet.
R14 (C)
When to replace the batteries
The tape speed slows down, volume decreases, or sound is distorted during operation.
Notes on batteries
•Do not mix different types of batteries or old batteries with new ones.
•When the unit is not to be used for a long period, remove the batteries to prevent needless battery wear.
•Never recharge the batteries, apply heat to them or take them apart.
•Remove dead batteries.
If liquid leaks from the batteries, wipe thoroughly to remove.
Remote control (CSD-TD19 only)
Insert two R6 (size AA) batteries.
R6 (AA)
When the reach of the remote control signal is less than 5 meters (16 feet), replace the batteries.
The remote control may not operate correctly when:
-The unit is exposed to intense light, such as direct sunlight
-Objects block the remote control signal to the unit
To use the buttons on the remote control
Buttons on the remote control and the main unit with identical indications have the same functions.
SOUND ADJUSTMENT
Volume or tone adjustment does not affect recording.
VOLUME
Turn VOLUME to adjust.
T-BASS system
The
Set
4ENGLISH