REPEAT/
PROGRAM
MODE/OSC
e
PLAY/PAUSEr, t
sSTOP/BAND
PRESETTING STATIONS
You can preset up to 15 stations in each band.
1 Select a station.
2 Press PROGRAM once so that “M” is displayed to store the station.
A station is assigned a preset number, beginning from 1 in consecutive order for each band.
Preset number
Frequency
3 Repeat steps 1 and 2.
The next station will not be stored if a total of 15 preset stations have already been stored for a band.
To listen to preset stations
Select a band then press e PLAY/PAUSE/PRESET (e PLAY/PAUSE) repeatedly.
To clear a preset station
Select the preset number first. Within 5 seconds, hold down PROGRAM until “M” and the preset number disappear in the display.
The higher numbers in the band are decreased by one.
Maintenance
To clean the cabinet
Use a soft cloth lightly moistened with mild detergent solution. Do not use strong solvents such as alcohol, benzine or thinner.
To clean the heads
When the tape heads are dirty;
-high frequency sound is not emitted
-the sound is not adequately high
-the sound is
-the tape cannot be erased
-the tape cannot be recorded on
After every 10 hours of use, clean the tape heads with a head cleaning cassette.
Use separately sold
Refer to the instructions of the cleaning cassette for details.
To clean the lens | Lens |
| |
Use a cotton swab |
|
slightly moistened with |
|
cleaning fluid. Wipe |
|
gently from the center |
|
to the edge. |
|
En
ENGLISH 7