Phase

Depending upon the room or the characteristics of the right and left speakers, sound from the powered subwoofer may seem unnatural or unusually loud or soft.

In this case, try changing the PHASE switch setting. Set to the NORMAL or REVERSE position, whichever sounds better.

BASS SOUND RANGE

You can adjust the sound range of the powered subwoofer to complement the sound range of the other speakers.

Set the TURN OVER switch to one of the three positions.

60

Hz:

Output 60 Hz and under.

100

Hz:

Output 100 Hz and under.

150

Hz:

Output 150 Hz and under.

SPECIFICATIONS

Input terminals

INPUT 1 jack

 

 

INPUT 2 terminals

 

Input sensitivity/impedance

INPUT 1:

 

 

400 mV/10 kilo ohms (at 50 Hz)

 

 

INPUT 2:

 

 

4 V/4.5 kilo ohms (L and R)

 

 

(at 50 Hz)

 

Output terminals

SPEAKERS OUT terminals

En

Power output

150 W (4 ohms, T.H.D. less than 1%,

 

at 50 Hz to 200 Hz)

 

 

180 W (4 ohms, T.H.D. 10%,

 

 

at 100 Hz)

 

Frequency response

50 Hz – 200 Hz

 

Speaker type

Bass reflex type

 

Speaker unit

25 cm (9 7/8 in.)(Magnetically

 

 

shielded type)

 

Power requirement

AC 120 V, 60 Hz

 

Power consumption

70 W

 

Dimensions (w/h/d)

320 ⋅ 378 ⋅ 447 mm

 

 

( 12 5/8 ⋅ 15 ⋅ 17 5/8 in.)

 

Weight

14.1 kg (31 lbs 1 oz.)

 

Specifications and external appearance are subject to change without notice.

AUTO POWER

Before using this function, make sure the POWER button is set to ON.

While the AUTO POWER switch is set to ON, the power is automatically turned on when receiving a signal input from either INPUT 1 or INPUT 2. The power is automatically turned off if no signal is input for a while and the indicator of the POWER button turns off.

If input signal is too weak (e.g. at a quiet scene in a DVD playback), this function may not work.

In such a case, set the AUTO POWER switch to OFF.

7