
Note
Do not plug in the AC power cords of both
Turn off the power of the equipment and remove the speaker cords from the speaker terminals on the equipment.
1Connect the speaker terminals on E the equipment to the INPUT 2 (FROM SPEAKERS OUT) terminals on
•Make sure the L and R and the )and (cords are connected correctly.
2With the speaker cords removed from the equipment (see “Preparations” above), connect Rthe right and Lleft speakers to the SPEAKERS OUT terminals on
3Set the INPUT SELECT switch to “2”.
4Connect the AC power cord to an AC outlet.
Note
Use left/right speakers whose impedance corresponds with the value specified on the equipment.
En
5