PREPARATIONS

Positioning

Because low-frequency sound reproduced by the powered subwoofer is mostly non-directional, the listener will be unable to localize the bass source. Accordingly, the powered subwoofer provides maximum flexibility in terms of positioning. For the most effective low-frequency sound, the

En powered subwoofer should be placed on the floor close to a wall or in a corner of the room.

(Position example)

Connection

A Connection

There are two ways (Aand B) to connect TS-W150 to equipment (stereo system, receiver or etc).

If the epuipment has an output jack for subwoofer, use AConnection.

If not, use BConnection..

Note

Do not connect TS-W150 to equipment in both Aand B ways simultaneously.

Note

Do not plug in the AC power cords of both TS-W150 and the epuipment to the AC power outlets before all other connections are made.

1Connect the SUB WOOFER or SUPER WOOFER jack on Ethe equipment to the INPUT 1 (FROM SUBWOOFER TERMINAL) jack on STS-W150 with C the supplied connecting cord.

2Set the INPUT SELECT switch to “1”.

3Connect the AC power cord to an AC outlet.

4