DOWNMIX (DVD only)

Switches the method for mixing down to 2 channels when you play a DVD which has rear sound elements (channels) or is recorded in Dolby Digital format. For details on the rear signal components, see “Checking the audio signal format” (page 41). This function affects the output of the following jacks:

LINE OUT L/R (AUDIO) jacks

DIGITAL OUT (COAXIAL) jack when “DOLBY DIGITAL” is set to “D-PCM” (page 54).

DOLBY

Normally, select this position.

SUR-

Multi-channel audio signals are

ROUND

output to two channels for

 

enjoying surround sounds.

 

 

NORMAL

Multi-channel audio signals are

 

downmixed to two channels for

 

use with your stereo.

 

 

DIGITAL OUT

Selects if audio signals are output via the DIGITAL OUT (COAXIAL) jack.

ON

Normally select this position. When

 

you select “ON,” see “Setting the

 

digital output signal” for further

 

settings.

 

 

OFF

The influence of the digital circuit

 

upon the analog circuit is minimal.

 

 

Setting the digital output signal

Switches the method of outputting audio signals when you connect a component such as an amplifier (receiver) or MD deck with a digital input jack.

For connection details, see page 18.

Select “DOLBY DIGITAL” and “DTS” after setting “DIGITAL OUT” to “ON.”

AUDIO SETUP

AUDIO ATT:

OFF

 

AUDIO DRC:

STANDARD

 

DOWNMIX:

DOLBY SURROUND

 

DIGITAL OUT:

ON

 

DOLBY DIGITAL:

D-PCM

 

DTS:

OFF

 

If you connect a component that does not conform to the selected audio signal, a loud noise (or no sound) will come out from the speakers, affecting your ears or causing the speakers to be damaged.

DOLBY DIGITAL (DVD only)

Selects the type of Dolby Digital signal.

D-PCM

Select this when the player is

 

connected to an audio

 

component without a built-in

 

Dolby Digital decoder. You can

 

select whether the signals

 

conform to Dolby Surround

 

(Pro Logic) or not by making

 

adjustments to the

 

“DOWNMIX” item in

 

“AUDIO SETUP” (page 54).

 

 

DOLBY

Select this when the player is

DIGITAL

connected to an audio

 

component with a built-in

 

Dolby Digital decoder.

 

 

DTS (DVD only)

Selects whether or not to output DTS signals.

OFF

Select this when the player is

 

connected to an audio

 

component without a built-in

 

DTS decoder.

 

 

ON

Select this when the player is

 

connected to an audio

 

component with a built-in DTS

 

decoder.

 

 

54

Page 54
Image 54
Aiwa XD-AX10 Setting the digital output signal, Downmix DVD only, Dolby Digital DVD only, DTS DVD only