Symptom

Cause and/or corrective action

“HOLD” flashes in the

c The buttons are locked. Slide the HOLD switch back. (page 23)

display when you press a

 

button, and the CD does not

 

play.

 

Playback starts from the point you stopped. (resume function)

cThe resume function is working. To start play from the first track, press and hold u/ENT during stop until the first track starts playing, or open the lid of the CD player. Or remove all power sources, then insert the batteries or connect the AC power adaptor again. (pages 13, 14, 25)

Rustling noise is heard from

c Close the lid of the battery compartment firmly. (page 25)

the CD.

 

During playback of an ATRAC CD or MP3 CD, the CD does not rotate but you can hear the sound normally.

cThe CD player is designed to stop the rotation of an ATRAC CD or MP3 CD during playback to reduce the power consumption. The player is not malfunctioning.

“NO FILE” appears on the

c There are no ATRAC3plus/ATRAC3/MP3 files in the CD.

display after you press u/

c

A CD-R/RW from which the data has been erased is being used.

ENT or when the lid of the CD

c

The CD is dirty.

player is closed.

 

 

When closing the lid of the CD player, the CD starts to rotate.

cThe CD player is reading the information on the CD. The player is not malfunctioning.

The LCD display becomes

c

You are using your CD player at high temperatures (above 40°C/

hard to see or slows down.

 

104°F) or at low temperatures (below 0°C/32°F). At room

 

 

temperature, the display will return to its normal operating

 

 

condition.

Play is stopped abruptly.

c

OFF TIMER has been set. Change the setting to “OFF.”

information Additional

31GB