AKG Acoustics C 2000 B specifications 2000B, Stage and Studio Condenser Microphone Description

C 2000B

Stage and Studio Condenser Microphone

Description

The C 2000 B is a versatile, side-address cardioid condenser microphone intended for professional and home studio applications as well as on-stage activities. It consists of a patent pending one-half inch capsule element which is placed in a larger baffle ring. This measure gives the C 2000 B more forward directionality at high frequencies. The microphone’s response is tailored to have a broad on-axis rise at high frequencies, while maintaining a fairly uniform diffuse field over the entire frequency band. The added presence at very high frequencies is an asset in many micing situations, especially home recording studios, while maintaining good feedback rejection in live sound applications.

Its 0.5% THD point of 140 dB (150 dB with the integral 10-dB pad engaged) and high sensitivity of 20 mV/Pa indicate that this model can deliver maximum operating output signals in the range of 4 volts. The self-noise floor is 20 dB (A), giving the microphone an effective dynamic range of 120 dB. An integral bass cut switch provides a gentle 6 dB per octave roll-off below 500 Hz, and as such will compensate for the proximity effect (low frequency boost) associated with close micing.

The cardioid polar pattern, has been refined to give maximum rejection across the frequency band at 180 degrees. Internal shock mounting of the diaphragm assembly makes this model studio friendly and easy to use in demanding live performances. The SA41/1 stand adapter is included. Optional accessories include the B18E battery supply unit and the H 100 external elastic shock suspension.

Specifications

Transducer type:	Prepolarized condenser
Frequency response:	30 Hz to 20 kHz
Sensitivity at 1 kHz:	20 mV/Pa (-34 dBV)
Polar pattern:	Cardioid
Pre-attenuation:	10 dB
Bass cut filter:	6 dB/octave below 500 Hz
Impedance:	200 ohms

Recommended loading: >1000 ohms

Equivalent noise level (A-weighted): 20 dB

Sound pressure level for 0.5% THD:

140 dB (150 dB with 10 dB pre-attenuation)

S/N ratio (A-weighted): 74 dB

Power requirement:	Phantom powering, 9 to 52 Vdc
Current consumption:	<2 mA
Output connector:	3-pin XLR-M
Finish:	champagne
Size:	2.1 in. diameter (53 mm);
	6.3 in. length (159 mm)

Features

•Wide dynamic range of 120 dB

•Transformerless output for ultra low LF distortion

•Frequency response shaped for studio applications and highest gain before feedback

•Pre-attenuation (-10 dB)

•Bass roll-off provided (6dB/octave below 500Hz)

•Dedicated cardioid polar pattern

Net/shipping weight: 11.5 oz. (325 g)/2.1 lb. (950 g)

Included accessories: SA 41 stand mount

Optional accessories: B 18 E battery power supply H 100 elastic shock suspension