Specifications

Models:

C 391 B

CK 92

CK 93

CK 94

CK 97-0

CK 97-C

CK 97-CVR

CK 98

Transducer Principle:

 

 

All models prepolarized condenser capsules.

 

 

 

Frequency Range

20–20,000 Hz

20–20,000 Hz

20–20,000 Hz

20–20,000 Hz

20–18,000 Hz

150–18,000 Hz

150–18,000 Hz

20–20,000 Hz

Polar Pattern:

Cardioid

Omnidirectional

Hypercardioid

Bidirectional

Omnidirectional

Cardiod

Cardiod

Directional

Sensitivity at 1,000 Hz:

10 mV/Pa

10 mV/Pa

10 mV/Pa

10 mV/Pa

10 mV/Pa

12 mV/Pa

12 mV/Pa

25 mV/Pa

 

(-40 dBV)

(-40 dBV)

(-40 dBV)

(-40 dBV)

(-40 dBV)

(-38 dBV)

(-38 dBV)

(-32 dBV)

Equivalent Noise Level:

17 dB-A

17 dB-A

17 dB-A

22 dB-A

24 dB-A

26 dB-A

26 dB-A

17 dB-A

SPL for 1% THD:

132 dB

132 dB

132 dB

132 dB

120 dB

120 dB

120 dB

124 dB

S/N Ratio (A-weighted):

77 dB

77 dB

77 dB

72 dB

70 dB

68 dB

68 dB

77 dB

Electr. Impedance:

 

 

 

< 200 ohms

 

 

 

Load Impedance:

 

 

 

> 1,000 ohms

 

 

 

Power Requirement:

 

 

9 to 52 Vdc phantom powering for SE300B

 

 

Connector:

 

 

All models XLR male output when connected to SE300B

 

 

Cable Length:

10 ft. (3 m)

10 ft. (3 m)

Finish:

 

 

All models dark gray matte finish.

 

 

Size:

0.7 x 5.8 in.

0.7 x 2 in.

0.7 x 2 in.

0.7 x 2.3 in.

0.3 x 0.7 in.

0.4 x 1.0 in.

0.4 x 20 in.

0.4 x 10.2 in.

 

(19 x 47 mm)

(19 x 52 mm)

(19 x 52 mm)

(19 x 58 mm)

(7.5 x 17 mm)

(11 x 25 mm) (11 x 500 mm)

(19 x 260 mm)

Net/Shipping Weight:

4.2 oz. (120 g)

1.2 oz. (35 g)

1.2 oz. (35 g)

1.2 oz. (35 g)

0.1 oz. (3 g)

0.1 oz. (6 g) 3.5 oz. (100 g)

2.8 oz. (80 g)

 

16.6 oz. (470 g )

6.0 oz. (170 g)

6.0 oz. (170 g)

6.0 oz. (170 g)

6.7 oz. (190 g)

6.7 oz. (190 g)

13.1 oz. (317 g)

13.8 oz. (390 g)

*With the 10-dB pad engaged, all SPL values for 1.0% THD can be raised 10 dB. Specifications measured with capsules attached to SE300B.

Accessories

Model:

Included:

Optional:

C 391 B

SA 40 Stand adapter

A 91 Swivel joint

 

W 90 Foam windscreen

MK 90/3 + H 98, Extension cable and stand adapter/ hanger

 

 

VR 91 15 in. (350 mm) extension tube

 

 

VR 92 47.2 in. (1.2 meter) extension tube with short gooseneck

 

 

W 95 Metal mesh and foam windscreen filter

CK 91, 92, 93, and 94

W 90 Foam windscreen

Same as for C 391 B

CK 97-0 and CK97-C

H 40/1 Universal clamp

For SE 300 B: B 18 E Battery supply

 

for two capsules

N 62 E AC Power supply

 

H 41 Tie pin

 

 

W 97/1 Foam windscreen

 

 

(For CK 97-0)

C 97-CVR + SE 300 B:

 

W 97 Foam windscreen

B 18 E Battery power supply

 

(For CK 97-C)

N 62 E AC Power supply

CK 97-CVR

W 97 Foam windscreen

H 10 Stereo bar, H 38 Shock mount

 

 

SA 38/H 38 Shock mount/stand adapter

 

 

ST 45 Table stand, ST 305 Heavy duty table stand

CK 98

W 98 Windscreen

A 91 Swivel joint

 

 

VR 91 15 in. (350 mm) angled extension tube

SE 300 B

SA 40 Stand adapter

See above

Architects and Engineers Specifications

The microphone shall be of the condenser type with a capsule and powering module assembly no larger than 0.75 in. (19 mm) in diameter. For applications requiring field switchable patterns, the capsule shall be demountable and attached by means of a half-turn bayonet action. (Threaded capsules shall not be allowed under this specification, because of inconvenience and the chance of cross- threading.) The microphone shall accept phantom powering over the nominal ranges of 12 to 48 volts and the nominal output impedance shall be equal to or less than 200 ohms at 1 kHz. The microphone shall provide a switchable 10 dB pre-electronics pad for operation at high sound pressure levels, and a switchable low-

frequency cut of 12 dB-per-octave shall be provided.

The polar pattern shall be (*), and on-axis frequency response shall be (*). Microphone sensitivity shall be at least (*) millivolts per pascal, and the self noise floor shall be no higher than (*) dB-A. The 1.0 % THD operating level shall be (*) dB SPL. (Additional for C 397-CVR)

The microphone capsule shall be separated from the powering/ output module by a thin gooseneck extension at least 20 in. (500 mm) in length. The microphone shall be the AKG Acoustics Model SE 300 B plus the (*) capsule.

*Insert data from specifications chart.

Page 3
Image 3
AKG Acoustics CK 94, C 97-0, CK 92, CK 91, CK 93, CK 97-CVR manual Accessories, Architects and Engineers Specifications