11..11 SSaaffeettyy
11..22 EEnnvviirroonnmmeenntt
22..11 IInnttrroodduuccttiioonn
22..22 PPaacckkiinngg LLiisstt
22..33 OOppttiioonnaall AAcccceessssoorriieess
1. Do not spill any liquids on the equipment and do not drop any objects through the ventilation slots in the equipment.
2. The equipment may be used in dry rooms only.
3. The equipment may be opened, serviced, and repaired by authorized personnel only. the equipment contains no user-servicea-
ble parts.
4. Before connecting the equipment to power, check that the AC mains voltage stated on the supplied power supply is identical to
the AC mains voltage available where you will use the equipment.
5. Operate the equipment with the supplied 12 VDC power supply. Using adapters with an AC output and/or a different output volt-
age may cause serious damage to the equipment.
6. If any solid object or liquid penetrates into the equipment, shut down the sound system immediately. Disconnect the power sup-
ply from the power outlet immediately and have the equipment checked by AKG ser vice personnel.
7. If you will not use the equipment for a long period of time, disconnect the power supply from the power outlet. Please note that
the equipment will not be fully isolated from power when you set the power switch to OFF.
8. Do not place the equipment near heat sources such as radiators, heating ducts, or amplifiers, etc. and do not expose it to direct
sunlight, excessive dust, moisture, rain, mechanical vibrations, or shock.
9. To avoid hum or interference, route all audio lines, particularly those connected to the microphone inputs, away from power lines
of any type. If you use cable ducts, be sure to use separate ducts for the audio lines.
10.Clean the equipment with a moistened (not wet) cloth only. Be sure to disconnect the power supply from the power outlet before
cleaning the equipment! Never use caustic or scouring cleaners or cleaning agents containing alcohol or solvents since these
may damage the enamel and plastic parts.
11.Use the equipment for the applications described in this manual only. AKG cannot accept any liability for damages resulting from
improper handling or misuse.
1. The power supply will draw a small amount of current even when the equipment is switched off. To save energy, disconnect the
power supply from the power outlet if you will leave the equipment unused for a long period of time.
2. When scrapping the equipment, separate the case, circuit boards, and cables, and dispose of all components in accordance with
local waste disposal rules.
3. The packaging of the equipment is recyclabe. Dispose of the packaging in an appropriate container provided by the local waste
collection/recycling entity and observe all local legislation relating to waste disposal and recycling.
Thank you for purchasing an AKG product. This Manual contains important instructions for setting up and operating your equipment.
Please take a few minutes to read the instructions below carefully before operating the equipment. Please keep the Manual for
future reference. Have fun and impress your audience!
Check that the packaging contains all of the components listed above. Should anything be missing, please contact your AKG dealer.
1 Safety and Environment
L
!
12 PS 4000 W
2 Description
•Power supplies:
12 V DC/500 mAfor distributed powering
only
12 V DC/≥1,4 Afor two receivers
•SRA 2 B/Wactive directional antenna
SRA 2 Wpassive directional antenna
•RA 4000 B/Wactive omnidirectional
antenna
RA 4000 Wpassive omnidirectional
antenna
•AB 4000antenna booster
•Antenna cables:
MK PS: 2 ft. (60 cm)
MKA 5: 15 ft. (5 m)
MKA 20: 66 ft. (20 m)
•PSU 4000 central power supply
•ASU 4000remote power adapter
1 PS 4000 W antenna splitter 1 rack mount kit
BDA_PS4000W_D030928_neu:PS 4000-Hex 01/20/2010 18:16 Seite 12 (Schwarz/Black Auszug)