MAINTENANCE

MAINTENANCE

ROLLER BEARING REPLACEMENT

Securely support mower while removing and installing roller assembly.

If installing a roller with pre assembled bearing and bracket assemblies, remove the old roller, proceed to step 11.

1.Remove roller and both bearing and bracket assemblies from mower. Lift the mower only high enough to remove the roller assembly.

2.Slide bearing and bracket assemblies off each end of roller. If replacing with new bearing and bracket assemblies, proceed to step 9.

3.Remove roller bearing and housing assembly attaching hardware. Remove assembly from bracket. Inspect seal between assembly and bracket for brittleness, cracks, wear and tear. Replace if necessary. If replacing with new roller bearing and housing assemblies, proceed to step 8.

4.Remove grease fitting from the top of bearing housing.

5.Remove bearing from housing by rotating Bearing 90O sideways and line up with notches in Bearing Housing then pull out.

6.Install new bearing into housing. Bearing must be installed with grease hole in bearing aligned with grease fitting hole in housing.

7.Reinstall grease fitting to housing. Grease Fitting must have locking pin installed which inserts into grease hole in bearing when installed. If Grease Fitting does not have a pin, order a new grease fitting. Grease fitting must be tight and seated in grease hole in bearing to prevent bearing from rotating in housing.

8.Attach roller bearing and housing assembly to bracket with seal between housing and bracket.

9.Slide bearing and bracket assemblies on each end of roller.

10.Check bearing for proper installation in housing by gently rocking bearing and bracket assembly in end of roller. Play should be slight to none at all.

11.Install roller and bearing and bracket assemblies on mower.

12.Lubricate roller bearing until lubricant can be seen coming out between roller and bearing housing.

VERSA 03/09

Maintenance Section 4-10

© 2009 Alamo Group Inc.

Page 173 Page 175
Page 174
Image 174
Alamo Versa Series manual Roller Bearing Replacement
Page 173 Page 175

Versa Series specifications

The Alamo Versa Series stands out in the world of professional mowing equipment, offering a robust solution for efficient landscape maintenance. Engineered with advanced technology and user-centric features, this series is designed to meet the demanding needs of municipalities, contractors, and landscape professionals.

One of the standout features of the Versa Series is its versatility. Designed for multi-functional use, these machines are compatible with a variety of attachments, making them suitable for tasks beyond just mowing. Users can easily switch between different implements, such as leaf blowers, snow plows, or aerators, enhancing their investment and making the equipment adaptable for year-round maintenance.

Powered by a reliable and efficient engine, the Alamo Versa Series offers impressive performance, ensuring that it can handle tough terrains and dense vegetation with ease. The high-torque engine is optimized for fuel efficiency while delivering consistent power, providing hours of operation without the need for frequent refueling. This translates into increased productivity and reduced downtime for users.

The cutting systems in the Versa Series are equally impressive. Equipped with high-performance mowing decks, operators can expect clean and precise cuts, contributing to healthier turf. The decks are designed with advanced airflow technology, ensuring that clippings are evenly distributed and promoting a manicured appearance. Adjustable cutting heights add to the flexibility, allowing users to customize their mowing experience based on seasonal requirements or personal preferences.

Ergonomics play a crucial role in the design of the Versa Series. The operator stations are equipped with intuitive controls that minimize strain and maximize comfort during long hours of operation. Features such as padded seats, adjustable steering, and easy-access levers contribute to a user-friendly experience, reducing fatigue and increasing operational efficiency.

The construction of the Alamo Versa Series is robust, built to withstand the rigorous demands of daily use. The chassis and components are crafted from high-grade materials, designed to endure harsh conditions while remaining lightweight for maneuverability. Additionally, maintenance is made simple with easily accessible parts, reducing service time and keeping the equipment in optimal condition.

In conclusion, the Alamo Versa Series is a powerful, efficient, and versatile lineup that caters to the needs of landscape professionals. With its user-friendly design, advanced technologies, and durable construction, it is a reliable choice for anyone looking to elevate their mowing experience. Whether for commercial landscaping or municipal maintenance, the Versa Series is engineered to deliver exceptional results.
Top Page Image Contents