(SGM-07)

OPERATION

Rotary Mowers are capable under adverse conditions of throwing objects for great distances 100 yards or more) and causing serious injury or death. Follow safety messages carefully.

STOP MOWING IF PASSERSBY ARE WITHIN 100 YARDS UNLESS: Front and Rear Deflectors are installed and in good, working condition;

Mower Head is running close to and parallel to the ground without exposed Blades; Passersby are outside the existing thrown-object zone;

All areas have been thoroughly inspected and all foreign material such as rocks, cans, glass, and general debris has been removed.

NOTE: Where there are grass and weeds high enough to hide debris that could be struck

by the blades, the area should be: inspected and large debris removed, mowed at an intermediate height, inspected closely with any remaining dsebris being removed, and mowed again at desired final height. (SBM-1)

10.2 Operating Speed and Ground Speed

Ground speed for mowing will depend upon the height, type, and density of vegetation to be cut. Do Not exceed 2 MPH while operating. Operate the mower at its full rated PTO speed to maintain blade speed for a clean cut. Refer to the tractor operator’s manual or the tractor instrument panel for the engine speed and gear to provide the required operating and desired ground speed. Make sure that the mower is operating at its full rated speed before entering the vegetation to be cut. Always start and stop cutting blades with engine near idle.

Ground speed is achieved by transmission gear selection and not by the engine operating speed. The operator may be required to experiment with several gear range combinations to determine the best gear and range which provides the most ideal performance from the implement and most efficient tractor operation. As the severity of cutting conditions increase, the ground speed should be decreased by selecting a lower gear to maintain the proper operating PTO speed. OPS-B- 0009

Mow at the speed that you can safely operate and control the tractor and mower. The correct mowing speed depends on terrain condition and grass type, density, and height of cut. Normal ground speed range is from 2 to 5 mph(3-8 kph). Use slow mowing speeds when operating on or near steep slopes, ditches, drop-offs, overhead obstructions, power lines, or when debris and foreign objects are to be avoided.

Versa 03/09

Operation Section 3-39

© 2009 Alamo Group Inc.

OPERATION

Page 150 Page 152
Page 151
Image 151
Alamo Versa Series manual Operating Speed and Ground Speed
Page 150 Page 152

Versa Series specifications

The Alamo Versa Series stands out in the world of professional mowing equipment, offering a robust solution for efficient landscape maintenance. Engineered with advanced technology and user-centric features, this series is designed to meet the demanding needs of municipalities, contractors, and landscape professionals.

One of the standout features of the Versa Series is its versatility. Designed for multi-functional use, these machines are compatible with a variety of attachments, making them suitable for tasks beyond just mowing. Users can easily switch between different implements, such as leaf blowers, snow plows, or aerators, enhancing their investment and making the equipment adaptable for year-round maintenance.

Powered by a reliable and efficient engine, the Alamo Versa Series offers impressive performance, ensuring that it can handle tough terrains and dense vegetation with ease. The high-torque engine is optimized for fuel efficiency while delivering consistent power, providing hours of operation without the need for frequent refueling. This translates into increased productivity and reduced downtime for users.

The cutting systems in the Versa Series are equally impressive. Equipped with high-performance mowing decks, operators can expect clean and precise cuts, contributing to healthier turf. The decks are designed with advanced airflow technology, ensuring that clippings are evenly distributed and promoting a manicured appearance. Adjustable cutting heights add to the flexibility, allowing users to customize their mowing experience based on seasonal requirements or personal preferences.

Ergonomics play a crucial role in the design of the Versa Series. The operator stations are equipped with intuitive controls that minimize strain and maximize comfort during long hours of operation. Features such as padded seats, adjustable steering, and easy-access levers contribute to a user-friendly experience, reducing fatigue and increasing operational efficiency.

The construction of the Alamo Versa Series is robust, built to withstand the rigorous demands of daily use. The chassis and components are crafted from high-grade materials, designed to endure harsh conditions while remaining lightweight for maneuverability. Additionally, maintenance is made simple with easily accessible parts, reducing service time and keeping the equipment in optimal condition.

In conclusion, the Alamo Versa Series is a powerful, efficient, and versatile lineup that caters to the needs of landscape professionals. With its user-friendly design, advanced technologies, and durable construction, it is a reliable choice for anyone looking to elevate their mowing experience. Whether for commercial landscaping or municipal maintenance, the Versa Series is engineered to deliver exceptional results.
Top Page Image Contents