Alcatel-Lucent 1850 TSS-160 Igmp functionality, ATM functionality, Mpls functionality, Protection

Ethernet forwarding criteria

•Port

•Port plus MAC

•Port plus VLAN

•Port plus MAC plus VLAN

•Port plus MAC plus VLAN plus

Prio bits

•Unicast traffic

•Multicast traffic

•Broadcast traffic

IGMP functionality

•Internet Group Management Protocol (IGMP) snooping

•IGMP proxy

•IGMP fast leave

ATM functionality

•Pseudo-wire emulation edge to edge (PWE3): ATM-PWE3 gateway

•OC-3/STM-1 ATM unchannalized

•ATM virtual path identifier/virtual channel identifier (VPI/VCI)

N:1 mapping with PWE3 static configuration

•ATM QoS, OAM F4, F5: PWE OAM

T-MPLS functionality

•Data plane: T-MPLS, MPLS

•T-MPLS OAM: CV, automatic pro- tection switching (APS), forward defect indication (FDI)

•Tunnel Lin Protection 1:1

•Ethernet line (E-line), E-LAN and E-Tree

SONET/SDH functionality

•Cross-connection

•Termination

•Ethernet mapping over SONET/SDH

¬Generic framing procedure: GFP, G.7041

•Virtual concatenation (VCAT)

•Link capacity adjustment scheme

(LCAS)

•Performance monitoring

•HO and LO capabilities

DWDM functionality

•Node configurations

¬Terminal

¬In-line amplifier (ILA)

•Network configurations

¬Point-to-point

¬Linear

¬Ring

¬Mesh

Protection

•Ethernet network protection

¬RSTP: 802.1w

¬MSTP: 802.1s

¬Link aggregation

•T-MPLS network protection

¬Tunnel Lin Protection 1:1

•SONET/SDH network protection

¬Single- and dual-ended APS 1 + 1

¬Subnetwork Connection Protocol (SNCP), unidirectional path-switched ring (UPSR)

¬Multiplex Section-Protection

Ring (MSPRING) 2F bidirectional line switching ring (BLSR)

•Equipment protection

¬Power protection

¬Controller protection

¬Universal switch protection

G-MPLS control plane

•T-MPLS tunnel setup

•TDM HO path setup

Management

•Alcatel-Lucent 1350 Optical

Management System (OMS)

•TL1

•Zero-installation craft (ZIC) terminal

•Command line interface (CLI)

•Simple Network Management

Protocol (SNMP)

•Secure Shell (SSH) v2/Secure

Sockets Layer (SSL) for secure connection

Physical specifications

ANSI

Dimensions: Alcatel-Lucent 1850 TSS-160 subrack

•Subrack dimensions

¬Height: 304 mm (12.0 in.)

¬Width: 498 mm (19.6 in.)

¬Depth: 305 mm (12.0 in.) or 356 mm (14.0 in.)

•Designed to be installed in a standard ANSI rack

¬Height: 2.13 m (7.0 ft.)

¬Width: 660 mm (26.0 in.)

¬Depth: 305 mm (12.0 in.) or 356 mm (14.0 in.)

Power and cooling

•Power supply: DC feed (-48-V DC nominal)

•Power supply: -58-V

•Power consumption: up to 2000 W

•Cooling: forced air

Environment

•Operating temperature:

-5°C to +45°C (23°F to 113°F)

•Relative humidity: 0% to 90%, non-condensed

Regulatory compliance

•CE and UL certification

•NEBS level 3

•FCC part 15 class A

ETSI

Dimensions: Alcatel-Lucent 1850 TSS-160 subrack

•Subrack dimensions

¬Height: 304 mm (12.0 in.)

¬Width:498 mm (19.6 in.)

¬Depth: 290 mm (11.4 in.)

•Designed to be installed in a standard ETSI rack

¬Height: 2.20 m (7.2 ft.)

¬Width: 600 mm (23.6 in.)

¬Depth: 300 mm (11.8 in.)

Power and cooling

•Power supply: DC feed (-48-V DC nominal)

•Power supply: -65-V

•Power consumption: up to 2000 W

•Cooling: forced air

Environment

•Operating temperature:

-5°C to +45°C (23°F to 113°F)

•Relative humidity: 0% to 90%, non-condensed

Regulatory compliance

•CE certification

•Operating conditions:

ETS 300 019, Class 3.2

•Storage conditions:

ETS 300 019, Class 1.2

•Transportation conditions:

ETS 300 019, Class 2.2

•Electrostatic discharge (ESD)/elec- tromagnetic compatibility (EMC):

ETS 300 386 “Telecommunications Center”

Alcatel-Lucent 1850 TSS-160 Release 3 Data Sheet 3