Configuring BGP Controlling Route Flapping Through Route Dampening
OmniSwitch 6800/6850/9000 Advanced Routing Configuration Guide December 2007 page 4-39
Clearing the History
By clearing the dampening history, you are resetting all of the dampening information on all of the routes
back to zero, as if dampening had just been activated. Route flap counters are reset and any routes that
were suppressed due to route flapping violations are unsuppressed. Dampening information on the route
will start re-accumulating as soon as the command is entered and the statistics are cleared.
To clear the dampening history, enter the following command:
-> ip bgp dampening clear
Displaying Dampening Settings and Statistics
To display the current settings for route dampening, enter the following command:
-> show ip bgp dampening
A display similar to the following will appear:
Admin Status = disabled,
Half life value (seconds) = 300,
Reuse value (seconds) = 200
Suppress time (seconds) = 300,
Max suppress time (seconds) = 1800,
To display current route dampening statistics, enter the following command:
-> show ip bgp dampening-stats
A display similar to the following will appear:
Network Mask From Flaps Duration FOM
---------------+---------------+---------------+-----+-----------+-----
155.132.44.73 255.255.255.255 192.40.4.121 8 00h:00m:35s 175