Configuring OSPFv3 OSPFv3 Application Example
OmniSwitch 6800/6850/9000 Advanced Routing Configuration Guide December 2007 page 2-25
OSPFv3 Application Example
This section will demonstrate how to set up a simple OSPFv3 network. It uses three routers, each with an
area. Each router uses three VLANs. A backbone connects all the routers. This section will demonstrate
how to set it up by explaining the necessary commands for each router.
The following diagram is a simple OSPFv3 network. It will be created by the steps listed on the following
pages.
Three Area OSPFv3 Network
Backbone Area
(Area 0.0.0.0)
Area 0.0.0.1
Router 1
Router ID 1.1.1.1
Area 0.0.0.2
Router 2
Router ID 20.0.0.1
Area 0.0.0.3
Router 3
Router ID 3.3.3.3
VLAN 10
VLAN 20
VLAN 12
VLAN 30
VLAN 23
VLAN 31