Alcatel-Lucent AP80 technical specifications O R D E R I N G I N F O R M A T I O N

•Data rates: 6, 9, 12, 18, 24, 36, 48, 54 Mbps per channel

•Radio band selectable via software

•Multi-mode radio band 802.11a or 802.11b/g selectable via software

Manageability

•Management of all 802.11 parameters as AP

•Network-wide AP management via:

¬CLI

¬Web GUI

¬SNMP

•Access point profiles

•Management by:

¬Geographical location

¬BSSID

¬Radio type

•Encryption support (AP and WLAN switch)

¬40-bit / 64-bit / 128-bit / 152- bit WEP, TKIP, AES, WPA, WPA2

Interfaces-Electrical

•1 x 10/100 Base-TX auto-sensing Ethernet interface (IP67 8-pin male (pole) M12 circular DIN connector (Au) contacts):

¬Auto-sensing MDI/MDX

¬PoE 48V DC / 1.2A (30W) power over Ethernet (non- standard 802.3af)

¬Integral lightning arrester

•1 x 2.4 Ghz N-type female antenna Interface

•1 x 5 Ghz N-type female anten-

na Interface

•1 x electrical ground / safety terminal

•1 x Integral ENET lightening arrester

Power Adapter Interfaces

Access point (AP) port

•1 x 10/100 Base-TX auto-sensing Ethernet (RJ-45) network (AP) interface:

¬Auto-sensing MDI/MDX

¬PoE 48V DC / 1.2A power over Ethernet (non-standard 802.3af)

Network (ENET) Port

•1 x 10/100 Base-TX auto-sens- ing Ethernet (RJ-45) network (ENET), auto-sensing MDI/MDX Ethernet interface supplied with 8-Pin DIN to RJ-45 CAT-5 shield- ed Ethernet cable (164 ft / 50 m)

Interfaces-Mechanical

•4 x mounting bracket points

•Ruggedized pole or mast mount hardware provided (articulating in horizontal and vertical planes)

•Ruggedized wall mount hard- ware as an available option.

Visual Indicators (LEDS)

•(Ready) power on/off (provided on power Injector)

Power Requirements

•Access point power draw - 48V DC / 1.2A (30W) power-over- Ethernet (non-standard 802.3af)

•External power injector, auto- sensing 100-240V AC Input, 1.5A output 48 VDC, 1.2A (30W) (provided)

Device Dimensions H/W/D

•7.80 x 7.80 x 2.76in. (198 x 198 x 70mm)

•Weight - 3.53Ibs (1.6Kilo)

Shipping Dimensions H/W/D

•19.7 x 11.8 x 6.7in. (500 x 300 x 170mm)

•Gross weight - 13.22lbs (6Kilos)

Environmental

•Temperature

¬Operating: -22 to 131 ºF (-30 to 55 ºC)

¬Storage: -40 to 176 ºF (-40 to 80 ºC)

•Humidity 0% - 95% (non-con- densing)

•Survival wind speed: 201Km/hr / 125mph

External Power Adapter

•Temperature

¬Operating: 32 to 140 ºF (0 to 60 ºC)

¬Storage: -58 to 158 ºF (-50 to 70 ºC)

•Humidity 0% - 95% (non-con- densing)

Mounting Options

•Pole or mast mount (hardware included)

•Wall mount (optional hardware)

Standards

•Ethernet IEEE 802.3 / IEEE 802.3u

•Wireless IEEE 802.11a/b/g

•PPP over Ethernet RFC2516

Radio Approvals

•FCC DOC Part 15 Class B (digital portion)

•FCC Part 15 subpart C 15.247

•FCC Part 15 subpart E 15.407

•ICES-003 Class B

•RSS 210 (Canada)

•VCCI Class B (Japan)

•Telec 2.4, Channel 14 and 5 GHz approved (Japan)

•CE marked with NB letter of opinion for RTTE

¬ETS 300 328 2.4 GHz

¬ETS 301 893 5.4 GHz

¬ETS 301 489 EMC

•MIC Korea

•SRRC (China)

•AS/NZS 3548 Class B

•AS/NZS4771 (C-tick)

Safety Approvals

•cULus listed

•PSE Mark (AC power supply)

•IEC 60950 CB certificate and report

•UL Listed (UL60950)

•UL Listed (Canadian Electrical Code/CSA 22.2 No. 60950)

•EN60950 / IEC60950

O R D E R I N G I N F O R M A T I O N

PART NUMBER DESCRIPTION

OAW-AP80MAlcatel-Lucent OAW-AP80M outdoor wireless access point. Includes one OAW-AP80M (simultaneous 802.11 “A”+ “B/G”) with dual N-type detachable antenna interfaces (1 x 2.4Ghz band and 1 x 5Ghz band), 1 x 10/100 BaseT (8Pin DIN) Ethernet interface (supports high power- over-Ethernet, integral power lightening arrester and ground point), 1 x RSSI DC alignment interface, pole / mast mounting hardware and Installation Guide. Also includes: indoor use only auto-sensing 110/240VAC to 48VDC power-over-Ethernet injector suitable for use with the OAW-AP80M wireless access points and 100 foot outdoor Ethernet cable (8Pin DIN to 10/100BaseT RJ-45). External antennas and antenna lightning arrestor shall be purchased separately.

OAW-AP-LAR-1Outdoor antenna lightning arrestor. Lightning surge arrestor for the OAW-AP80 access point: Single, in-line lightening arrester with N-type male to N-type female interface. Supports RF frequency pass through of 2Ghz – 6Ghz.

External antenna: Alcatel-Lucent offers a wide variety of outdoor rated detachable antenna types certified for use with the OmniAccess AP80M. Please contact your local sales representative for details.

www.alcatel-lucent.com

Alcatel, Lucent, Alcatel-Lucent and the Alcatel-Lucent logo are trademarks of Alcatel-Lucent. All other trademarks are the property of their respective owners. Alcatel-Lucent assumes no responsibility for the accuracy of the information presented, which is subject to change without notice.

© 2007 Alcatel-Lucent. All rights reserved. P/N 031883-00 Rev. E 8/07