4. USING THE MEMORIES
NOTE:When programming your TEMPORIS communicates with you using .
1 Beep :Whilst programming, each key pressed is validated by 1 .
2 Beeps :Indicate that your programming is correct.
3 Beeps :Something is wrong in your programming; Restart from the beginning.
Your telephone set can store 10 numbers of up to 24 digits.
4.1 PROGRAMMING THE MEMORIES

Programming without calling

lGo off hook.
lPress the Programming key.
lEnter the number.
lPress one of the ten memory keys.

Programming whilst calling

lGo off hook.
lEnter the number.
lPress the Programming key whether you are in conversation or not.
lPress one of the ten memory keys.
4.2 DIALLING FROM A MEMORY
lGo off hook.
lPress one of the ten memories keys.The loaded number is dialled automatically.
4.3 ERASING A MEMORY
lGo off hook.
lPress the Programming key twice.
lPress the key corresponding to the memory to be erased.
5. CHOOSING AND ADJUSTING THE RINGER
You can choose and adjust one of the four melodies available when your telephone
is ringing, or at any time after entering the programming mode.
5.1 WHEN YOUR TELEPHONE IS RINGING
Modification of the ringer can be carried out during a ringing phase.
lPress one of the keys 1,2, 3or 4to change the melody.
lTo reduce or increase ringing volume, press or on TEMPORIS 22 or
press or on TEMPORIS 12.
Your modifications are memorized, you can answer the call.
5.2 WHEN IN PROGRAMMING MODE
To access the programming mode:
lPress and hold keys 1and 3simultaneously.
lPick up the handset.
lRelease the keys.
lAccess to programming mode is confirmed by 1 beep.
BEEP
BEEP
BEEP

Tempori_22_uk.qxd 29/05/01 17:05 Page 5

Technical Manuals Online! - http://www.tech-man.com