6.4 IF YOU FORGOT THE PASSWORD
Access the programming mode again and then:
lPress the Programming key followed by 0.
lPress the *key.
l2 beepsare generated.
lGo on hook.

7. CONFIGURATION FOR PROFESSIONAL USE

If your TEMPORIS is connected directly to the public network, do not pay attention
to this chapter.
7.1 ACCESSING THE PROGRAMMING MODE
Your are offered 3 operations.For each of them, access the programming mode
again.
lPress keys 1and 3simultaneously.
lGo off hook.
lRelease the keys.
7.2 TYPE OF DIALLING
lPress the programming key followed by 2.
For pulse dialling
lPress the key (or key)
lGo on hook.
For tone dialling
lPress the key (or key).
lGo on hook.
7.3 FLASH DURATION (R)
Access the programming mode again and then:
lPress the Programming key followed by 3.
lPress : 1 for a 80 ms flash,
2 for a 100 ms flash,
3 for a 180 ms flash,
4 for a 250 ms flash,
5 for a 300 ms flash,
6 for a 600 ms flash.
lGo on hook.
FThis last operation erases the WHOLEprogramming including
memories.
The password is 0000 again.
BEEP
BEEP

Tempori_22_uk.qxd 29/05/01 17:05 Page 7

Technical Manuals Online! - http://www.tech-man.com