OmniSwitch Troubleshooting Guide September 2005 page -9
ip dvmrp debug-type
Enables or disables DVMRP debugging for a specified message type, or for all message types.
Note. Debugging for a specified message type will only be enabled if its debug level is a value greater
than zero (i.e., 1–255). For information on specifying the debug level, refer to the
ip dvmrp debug-level command.
ip dvmrp debug-type message_type
no ip dvmrp debug-type message_type
Syntax Definitions
message_type Enables or disables DVMRP debugging for the specified item. Select
from the list below. You may enter multiple message types in any order.
For example, ip dvmrp debug-type time flash init.
supported message types descriptions
all Enables or disables DVMRP debugging for all items listed below. The
syntax all can be used to easily turn debugging for all message types on
or off.
error Enables or disables debugging for DVMRP Error messages.
flash Enables or disables debugging for DVMRP Flash processing.
graft Enables or disables debugging for DVMRP Graft processing.
igmp Enables or disables debugging for DVMRP Internet Group Management
Protocol (IGMP) packet processing.
ipmrm Enables or disables debugging for DVMRP IP Multicast Routing Man-
ager (IPMRM) interaction.
init Enables or disables debugging related to DVMRP initialization code.
mip Enables or disables debugging for MIP (Management Internal Protocol)
processing. Includes CLI and SNMP.
misc Enables or disables miscellaneous debugging of DVMRP.
nbr Enables or disables debugging for DVMRP Neighbor processing.
probes Enables or disables debugging for DVMRP Probe processing.
prunes Enables or disables debugging for DVMRP Prune processing.
routes Enables or disables debugging for DVMRP Route processing.
time Enables or disables debugging for DVMRP Timer processing.
tm Enables or disables debugging for DVMRP Task Manager interaction.