Remote Controller Display
Operating Mode Selection
Display
AUTO | HEAT |
COOL | DRY |
FAN |
|
Signal Emission | AUH Display | Timer setting | |
Symbol | It appears | when | Display |
It appears when | pressing the | AUH |
|
control signal is | key is add in HEAT | ON timer | |
emitted. | mode. |
|
|
OFF timer
Wind Speed Selection
Display
AUT Auto High speed
Medium speed
Low speed
AUT | SET TEMP | PROGRAM |
PROGRAM
Program
Timer canceled
Time Display Displays the time of clock or timing ON/OFF.
Air refresh Display
(Not available)
Sleep Mode Display Displayed when Pressing “SLEEP” button the unit will enter into sleeping operation.
Display
displayed when temp is displayed.
Instructions for the remote controller
zThe remote controller uses two AAA alkaline battrries. Under normal condition, the batteries last for about 6 months. Please use two new batteries of similar type (pay attention to the poles in installing). After replacing the batteries, please use a point object (such as pen tip) to press “Reset” button.
zThe effective control distance of the remote controller is about 8 yards.
zWhen using the remote controller, please point the signal emitter towards the air conditioner receiver; There should be no obstacles between the remote controller and the air conditioner.
zDo no press two buttons simultaneously on the remote control.
zDo not use wireless equipment (such as mobile phone) near the air conditioner. If interference occurs because of this, please switch off the air conditioner, pull out power plug, then plug again and switch on after a while.
zIf direct sunlight is hitting the the receiver on the air conditioner it may not be able to receive the signal from the remote controller.
zTake care not to drop theh remote control and keep from direct sunlight or heat sources.
zKeep the remote control dry, if it gets wet use a soft, dry cloth for cleaning.
zThe batteries must be removed from the remote control before it is scrapped and disposed of safely.
8