Aleratec 280118 Operation, Precautions, Installation, •High humidity, •Excessive dust, •Direct sunlight, •High temperature, 4www.aleratec.com, •Mechanical vibration

Precautions

Before installing your 1:3 DVD/CD RoboRacer MultiDrive SA, please read the following.

InstallationAvoid placing the 1:3 DVD/CD RoboRacer MultiDrive SA in a location subject to:•High humidity•High temperature•Excessive dust•Mechanical vibration•Direct sunlight•Electromagnetic radiationOperation

Do not move the 1:3 DVD/CD RoboRacer MultiDrive SA during operation. This may cause it to malfunction during operations.

Note: Choose a Good Location

1.Allow adequate clearance for moving parts.

2.When placing the duplicator on the side/edge of a tabletop ensure that all four foot pads are in complete contact with the surface of the table.

3.Do not place near heat sources such as radiators or air ducts, or in a place subject to direct sunlight, excessive dust, mechanical vibration or shock.

4.Good care will help assure maximum product life. Improper operating environment and misuse may void the warranty.

5.Turn the duplicator off and leave unplugged when not in use.

4www.aleratec.com