Using the HDD Copy Dock Duplicator

Duplicator Mode

Main Menu: Compare HDD

The “Compare HDD” function performs a comparison of data from the source hard drive to the data on the target hard drive.

1.With the source and target HDDs loaded use the arrow buttons to select “Compare HDD”. The following screen will be displayed:

==HDDDupDuplicator.Menu ==

UP

ENT

21.-1Copy HDD ver:

 

POWER

DOWN

ESC

 

2.Press ENT to continue.

Are you sure?

UP

ENT

HDD D plicator

 

 

Enter: Yes

ESC: No

 

POWER

1-1

ver:

DOWN

ESC

 

 

3.Press ENT to begin the comparison. The system will auto-detect the hard drives.

During the compare process, the HDD Copy Dock Duplicator will display progress information.

Comp-23MB/s

5%

UP

ENT

HDD Duplicator

 

 

 

236.9.9GB

 

00:51:12

 

POWER

1-1

ver:

DOWN

ESC

 

 

 

When the comparison is completed, a job status screen will be displayed:

Compare OK:1 HDD Duplicator

Fail:0 Diff:0

1-1 ver:

UPENT

POWER

DOWNESC

Note: If the Compare function detects a drive that is not the same as the Source drive, it will begin to beep and report each LBA that is different. Please turn the unit off in this case and Compare each target drive individually to determine which one is different.

8

www.aleratec.com