A1321, A1322, and A1323
Ratiometric Linear Hall Effect Sensor for
Package UA, 3-Pin SIP
4.09 |
|
|
45° | B |
|
|
| |
2.01 | C | 3X10° |
3.02 | 1.44 | C |
| ||
| C |
|
|
| 0.79 |
1.02 |
|
|
MAX |
|
|
14.99 | 0.41 |
1 | 2 | 3 | |
|
|
|
|
0.43 
1.27
A
1.52
45°
3.02
15.75
4.09
45° 
2.01 C
2.16
MAX
1 | 2 | 3 |
|
|
|
0.43 
1.27
B
1.44 C
C
0.79
0.41
A
1.52
45°
Package UA, Matrix Leadframe
All dimensions nominal, not for tooling use Dimensions in millimeters
Exact case and lead configuration at supplier discretion within limits shown
Package UA, Conventional Leadframe
AActive Area Depth, 0.50 mm
BGate and tie bar burr area (for conventional leadframe, gate burr only)
CHall element, not to scale
Copyright
The products described herein are manufactured under one or more of the following U.S. patents: 5,045,920; 5,264,783; 5,442,283; 5,389,889; 5,581,179; 5,517,112; 5,619,137; 5,621,319; 5,650,719; 5,686,894; 5,694,038; 5,729,130; 5,917,320; and other patents pending.
Allegro MicroSystems, Inc. reserves the right to make, from time to time, such departures from the detail specifications as may be required to per- mit improvements in the performance, reliability, or manufacturability of its products. Before placing an order, the user is cautioned to verify that the information being relied upon is current.
Allegro’s products are not to be used in life support devices or systems, if a failure of an Allegro product can reasonably be expected to cause the failure of that life support device or system, or to affect the safety or effectiveness of that device or system.
The information included herein is believed to be accurate and reliable. However, Allegro MicroSystems, Inc. assumes no responsibility for its use; nor for any infringement of patents or other rights of third parties which may result from its use.
For the latest version of this document, visit our website:
www.allegromicro.com
Allegro MicroSystems, Inc. | 11 |
115 Northeast Cutoff
Worcester, Massachusetts
