Lint Filter . . .

CLEAN THE LINT FILTER BEFORE DRYING EACH LOAD. (Refer to illustration below for lint filter location.) Cleaning the lint filter is important because a layer or pad of lint on the filter will block the flow of air

through the dryer, thus reducing the efficiency of the dryer. The clothes will take longer to dry and energy will be wasted.

LINT

FILTER

D349IE3B

Motor Overload Protector . . .

The motor overload protector stops the motor and shuts the heat off automatically in the event of an overload. After cooling, the overload protector will reset itself. The dryer can be restarted by pressing or turning the

PUSH-TO-START button. If the overload protector cycles again, remove the dryer from use and call the service person to correct the problem.

28

504523