Maintenance
WARNING
To reduce the risk of electric shock, fire, explosion, serious injury or death:•Disconnect electric power to the tumbler before servicing.•Close gas•Whenever ground wires are removed during servicing, these ground wires must be reconnected to ensure that the tumbler is properly grounded.
W002
1.Inspect the area surrounding tumblers, remove all combustible materials, including lint, before operating the machines.
2.Check cylinder for foreign objects to avoid damage to clothing and equipment.
3.Clean lint from lint compartment and screen to maintain proper airflow and avoid overheating.
WARNING
To reduce the risk of serious injury, do not open the lint panel while the tumbler is in operation. Before cleaning the lint screen, open tumbler door and allow cylinder to completely stop.
W410
a.Open the lint panel or pull out lint drawer.
b.Remove all accumulated lint in the lint compartment area. Lightly brush any lint that may be left on the lint screen. Lint left in the lint compartment is drawn back onto the lint screen and will restrict proper air circulation.
c.Be sure the lint screen is not torn. If it is, replace immediately. A torn lint screen allows lint to pass from the tumbler to the ductwork system, thus creating a restriction to air circulation.
d.The lint screen is designed to completely cover the entire opening in the lint screen panel. Be sure that it does so. Excessive gaps between the lint screen and the lint screen panel allow lint to pass into the ductwork system.
e.Carefully wipe any accumulated lint off of the cabinet high limit thermostat and thermistor. Failure to do so will allow a buildup of lint in this area to act as an insulator, causing the tumbler to overheat. Refer to Figure 12.
f.Replace the lint compartment panel on the tumbler ensuring a tight fit, and lock if applicable.
70269501 | © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT | 21 |