Communication Mode

This mode is entered whenever the control is communicating with a PDA. Refer to PC and PDA

Application User Instructions.

Cool Down Mode

The control enters the Cool Down Mode after the heat segment of the cycle is completed. The control turns the heater off and for steam heated units turns the damper motor on. The cool down segment will end once the cool down temperature has been reached or the programmed cool down time expires, which ever happens first.

End of Cycle Mode

The control enters End of Cycle Mode after the cool down segment is finished. The display will toggle between “” and “” for one second each until End of Cycle Mode is exited. If the door has not been opened or a keypad has not been pressed after two minutes, the machine will enter Extended Tumble Mode. This mode is exited when the door is opened or Stop ( ) keypad is pressed. The control will then return to Idle Mode.

Control Identification

Extended Tumble Mode

The Extended Tumble Mode has two portions. The Anti-Wrinkle Tumble is entered two minutes after the cycle has ended if the door is not opened. The cylinder will tumble for 30 seconds every two minutes for up to one hour.

If the door hasn’t been opened and no keys have been pressed one hour after the Anti-Wrinkle Tumble has ended, the control increments the Anti-Wrinkle Time Exceeded audit counter and enters the Delayed Tumble. The cylinder will tumble for two minutes every 60 minutes for up to 18 hours.

Reversing Mode (reversing models only)

Models equipped with the reversing feature will rotate in the forward direction, pause, rotate in the reverse direction and then pause for programmable times and segments of the cycle. Factory default rotate time is 120 seconds and reversing stop time is 6 seconds for all cycles with reversing enabled.

Entering Diagnostic Mode From Idle Mode

When entered from the Idle Mode, the control will be running a test selected by the user via keypad presses or communication with a device.

70444901

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

11

Page 12 Page 14
Page 13
Image 13
Alliance Laundry Systems 70444901R3 manual Communication Mode, Cool Down Mode, End of Cycle Mode, Extended Tumble Mode
Page 12 Page 14

70444901R3 specifications

Alliance Laundry Systems has long been recognized as a leader in providing high-quality commercial laundry equipment, and the 70444901R3 stands as a testament to their commitment to innovation and performance. This model is particularly designed for the robust needs of laundromats, coin-operated facilities, and on-premise laundries, making it a versatile asset in the laundry industry.

One of the main features of the Alliance Laundry Systems 70444901R3 is its advanced microprocessor control system, which allows for precise management of wash cycles. This technology enables operators to customize and optimize wash programs based on specific fabric types and soil levels. Such adaptability ensures that every load receives the appropriate care, extending the life of the garments and maintaining their quality over time.

Additionally, the 70444901R3 is engineered with energy efficiency in mind. Its cutting-edge design minimizes water and energy consumption, reducing operational costs while also promoting sustainability. The machine's environmentally conscious construction not only benefits the bottom line but also aligns with growing consumer demand for eco-friendly practices in laundry operations.

In terms of capacity, the 70444901R3 boasts a sizeable drum, allowing for larger loads and thereby increasing throughput. This characteristic is essential for busy facilities aiming to maximize productivity. The sturdy construction also ensures that the unit can withstand heavy use without compromising performance.

Another noteworthy feature is the unit's user-friendly interface, which simplifies operation for staff and customers alike. Clear instructions and a straightforward display reduce the learning curve, making it easier for all users to navigate the laundry process.

Moreover, the 70444901R3 integrates various safety features to protect both users and the equipment. These include door locks during operation and overload protection, which contributes to its longevity and reliability.

Overall, Alliance Laundry Systems 70444901R3 is a powerful combination of advanced technology, energy efficiency, and user-friendly functionality, making it an excellent investment for businesses in the laundry sector looking to enhance their service offerings. With its capacity for high-volume processing and commitment to quality, this model continues to set the standard for commercial laundry operations.
Top Page Image Contents