Installation

Machine Dimensions

See Figure 2 for dimensions of the 35-pound capacity models. See Figure 3 for dimensions of the 50-pound capacity models. See Figure 4 for dimensions of the 85-pound capacity models.

Dimensional Clearances

The table below shows recommended minimum clearances on all sides of the washer-extractor.

Note: The dimensions shown here are for planning purposes only. They are approximate and subject to normal manufacturing tolerances. If exact dimensions are required for construction purposes, contact the distributor or manufacturer. We reserve the right to make changes at any time without notice.

Recommended Minimum Clearances

 

35

50

85

 

 

 

 

Minimum rear clearance, in. (mm)

18 (450)

18 (450)

18 (450)

 

 

 

 

Minimum clearance between machine and wall, in. (mm)

6 (150)

6 (150)

6 (150)

 

 

 

 

Minimum clearance between machines (side), in. (mm)

1 (25.4)

1 (25.4)

1 (25.4)

 

 

 

 

Minimum front clearance, in. (mm)

21 (533)

23 (584)

23 (584)

 

 

 

 

14

F232058