4.Close the loading door tightly. The washer will not operate with the loading door open.
6. Select EXTRA RINSE if desired.
FLW2171N
WA R N I N G
To reduce the risk of serious injury, do not bypass the loading door switch by permitting the washer to tumble or spin with the loading door open.
W095
5. Set WASH/RINSE temperatures.
FLW2174N
There are four or five WASH/RINSE temperatures available – Boosted Hot Wash/Cold Rinse (select models only), Hot Wash/Cold Rinse, Warm Wash/ Warm Rinse, Warm Wash/Cold Rinse, Cold Wash/ Cold Rinse.
Refer to the Water Temperature section for the temperature that works best for your garments.
WA R N I N G
Window may be hot in the Boosted Hot and Hot wash cycles.
W325
FLW2175N
The extra rinse control is useful for detergent sensitive skin. By pressing the EXTRA RINSE to ON, the REGULAR, PERMANENT PRESS, and DELICATE cycles will each provide an additional rinse. If the rinse is desired, press the switch to ON. When the extra rinse is not wanted, OFF should be selected.
7.Select the cycle according to the type of fabric being washed. Use the indicator dot on the cycle selector knob as a guide.
8.Press and hold the START button for two seconds to start the washer. The DOOR light will come on after a short delay, water fill will begin, and wash drum will begin tumbling.
NOTE: Washer door MUST be closed tightly to start washer.
If items need to be added or removed after a cycle has started, turn the cycle selector knob to the OFF position. Wait until the DOOR light goes off (approximately 45 seconds after cycle has been stopped), open door, add or remove items, and start the cycle again.
802753