Section 2

Operation

This manual is designed as a guide to operating and programming the 18-pound and 25-pound capacity cabinet freestanding washer-extractors equipped with the V-computer and AC inverter drive. The models covered by this manual are designed for use in on-premises laundries.

Keep the manuals, installation instructions, and the wiring diagrams which accompany the machine in a safe place for ready reference. They have been included with the machine at no charge. Additional copies are available at a nominal charge.

Customer Service

If literature or replacement parts are required, contact the source from whom the machine was purchased or contact Alliance Laundry Systems LLC at (920) 748-3950 for the name and address of the nearest authorized parts distributor.

For technical assistance, call any of the following numbers:

(850)718-1035

(850)718-1026

Marianna, Florida

Note: Read this manual thoroughly before attempting to operate the machine or program the microcomputer.

Note: Do not use this manual in conjunction with earlier model computer-controlled machines. Do not use technical literature intended for earlier models when operating this machine.

Note: All information, illustrations, and specifications contained in this manual are based on the latest product information available at the time of printing. We reserve the right to make changes at any time without notice.

(920)748-3121

Ripon, Wisconsin

A record of each machine is on file with the manufacturer. Always provide the machine’s serial number and model number when ordering parts or when seeking technical assistance.

Machine Familiarization Guide

The machine familiarization guide in Figure 2 provides front and rear views of the washer- extractor and identifies the major operational features of the machine.

F232072

11