Operation

Theory of Operation (Continued)

Note: Never turn the power off while the computer mode switch is in the PROGRAM position. Such action will disorder portions of the programmed data, necessitating reprogramming of some or all of

The following table describes the function of the individual keys when the machine is in RUN mode.

Keypad

KeyDescription

the existing cycles. Always return the mode switch to RUN position before turning the power off.

Up

Used in cycle selection; pressing this key moves among cycles from smaller to greater.

Down

Used in cycle selection; pressing this key moves among cycles from greater to smaller.

Keypad

Operation of the V-computer control is performed with a 4-key touch keypad and LED display located on the front of the machine. See Figure 3 for domestic and international versions of the keypad.

Start Used to start a cycle.

Stop Used to stop a cycle.

Out-of-Balance

Condition

High Water

Level

Medium Water

Level

Low

Water

Level

Up Down Start Stop

Domestic

International

R076RE3A

Figure 3

14

F232072