Alliance Laundry Systems LTS95A*N Load Sizes, Using Your Dispenser Drawer, Available Water Temperatures, Window may be hot in the Boosted Hot and Hot wash cycles

1.Get the clothes ready for washing. Empty pockets and cuffs. Sort items into separate loads. Pretreat stains and heavily soiled areas.

D305I

2.Measure and add low sudsing detergent, fabric softener, and bleach to the dispenser drawer. Refer to section on Using Your Dispenser Drawer.

H377I

IMPORTANT: If using detergents made for topload washers, avoid oversudsing by using only 1/4 cup regular detergent (1/2 of the recommended amount).

3.Load clothes into wash drum. Refer to section on Load Sizes in your Use and Care Guide.

H378I

4.Close the loading door tightly. The washer will not operate with the loading door open.

H379I

WARNING

To reduce the risk of serious injury, do not bypass the loading door switch by permitting the washer to tumble or spin with the loading door open.

W095

5. Set WASH/RINSE temperatures.

FLW2004N

There are four WASH/RINSE temperatures available – Boosted Hot Wash/Cold Rinse, Hot Wash/Cold Rinse, Warm Wash/Cold Rinse, Warm Wash/Warm Rinse, and Cold Wash/Cold Rinse.

Refer to the Available Water Temperatures section for the temperature that works best for your garments.

WARNING

Window may be hot in the Boosted Hot and Hot wash cycles.

W325

6. Select EXTRA RINSE if desired.

W547I

The extra rinse control is useful for detergent sensitive skin. By pressing the EXTRA RINSE to ON, the REGULAR, PERMANENT PRESS, and DELICATE cycles will each provide an additional rinse. If the extra rinse is desired, press the switch to ON. When the extra rinse is not wanted, OFF should be selected.

801405