Use and Care

Sort

If you have correctly sorted the items for washing, they should be properly sorted for drying too.

SEPARATE:LIGHTS

DARKS

SEPARATE: LINT-SHEDDING

FABRIC

LINT-RECEIVING

FABRIC

SEPARATE:

NO HEAT ITEMS

LOW HEAT ITEMS

HIGH HEAT ITEMS

D770I

Figure 5

Towels, flannels, chenille, cottons, rugs, etc., shed lint. Corduroys, knits (including socks), permanent press, and synthetics attract lint.

In any kind of drying, lightweight fabrics will dry faster than heavyweight fabrics. If mixed loads are dried together (such as sheets and towels), remove the lighter weight fabrics when they are dry to prevent overdrying and wrinkling. The best method is to dry clothes which require the same time and temperature in the same load.

Load

Do not overload your dryer. Bulk, not weight, determines the load size. If the dryer is overloaded, it could cause discoloration or permanent heat damage to the load. There should be space in the dryer for the clothes to tumble freely. This helps to reduce wrinkles. Large and small pieces together make up loads which will tumble well. Permanent press loads should be smaller to provide room for tumbling. Proper tumbling allows for fewer wrinkles. Figure 6 shows the ideal load sizes for fabrics. The average load will fill the cylinder one third to half full when wet.

SWD545N

CYLINDER WITH WET

COTTONS AND LINENS

SWD545N

SWD546N

CYLINDER WITH WET

PERMANENT PRESS

SWD546N

Figure 6

A load can be too small. Just a few small pieces will not tumble properly. They will take longer to dry and they may be wrinkled. For small loads, add a couple of large towels or non-lint-shedding items to aid in tumbling.

18

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

801506