Alliance Laundry Systems SWD441C 26

Maintenance

For Energy Conservation

●Make sure the lint filter is always clean.

●Do not overload dryer.

●Do not overdry clothes.

●Remove items to be ironed while still damp.

●Large loads of similar fabrics dry the most efficiently. However, dry permanent press in smaller loads to prevent wrinkling.

●Use the correct temperature FABRIC SELECTOR setting for the type of fabric being dried.

●Locate your dryer so the exhaust duct is as short and straight as possible.

●Do not open the door during the drying cycle.

●Plan to do your laundry on low humidity days; your clothes will dry faster.

●Should you plan to dry several loads, do them one after another, then you do not have to reheat the dryer’s interior parts each time.

Reinstallation of Shipping Materials

Remove front access panel by removing two screws.

Place the shock sleeves on all four shock absorbers. Refer to Figure 8.

Insert hooked end of shipping brace into the open slot of the motor mount. Attach with bolts and washers. Refer to Figure 8.

Reinstall front access panel.

2 4

H336I

1Shock Sleeves

2Motor Mount

3Bolts and Lockwashers

4Hooked End of Shipping Brace

Figure 8

Refer to the INSTALLATION INSTRUCTIONS for proper procedures whenever the washer is moved.

IMPORTANT: The shipping materials MUST be reinstalled whenever the unit is moved.

801506