Operation
Display Interpretations
Display | Meaning | Display | Meaning |
|
|
|
|
DOOR | Door not locked problem | SK | Soak |
|
|
|
|
EMTY | Empty problem | S1 | Supply #1 (Soap/Break) |
|
|
|
|
FILL | Fill problem | S2 | Supply #2 (Bleach) |
|
|
|
|
SDLY | Spin coast delay | S3 | Supply #3 (Softener/Sour) |
|
|
|
|
NEXT | Select cycle or open door or program | S4 | Supply #4 (as needed) |
|
|
|
|
NOGO | Cycle not available | S5 | Supply #5 (as needed) |
|
|
|
|
STOP | Stop key has been pressed or end of cycle | TH | Controlled Temperature Fill to High Level |
|
|
|
|
01/4 | One quarter hour (soak intervals) | TL | Controlled Temperature Fill to Low Level |
|
|
|
|
A1 | Buzzer or Auxiliary Output | TO | Controlled Temperature Overflow |
|
|
|
|
CF | Cold flush | NO FILL | Indicates machine cannot add heat due to low |
|
|
| level fill not being reached |
|
|
|
|
CH | Cold Fill to High Level | W1 | Wash #1 (Regular Reversing) |
|
|
|
|
CL | Cold Fill to Low Level | W2 | Wash #2 (Gentle Reversing) |
|
|
|
|
CO | Cold Fill to Overflow | W3 | Wash #3 (No Agitation) |
|
|
|
|
CR | Cold Rinse | WF | Warm Flush |
|
|
|
|
CY | Cycle Number | WH | Warm Fill to High Level |
|
|
|
|
DR | Drain | WL | Warm Fill to Low Level |
|
|
|
|
F | Heat select temperature | WO | Warm Fill to Overflow |
|
|
|
|
OH | Auxiliary heat in minutes (no hours) | WR | Warm Rinse |
|
|
|
|
HF | Hot Flush | • • • • • • | Dots indicate water valves turned on |
|
|
|
|
HH | Hot Fill to High Level | • | Left dot – hot spray valve |
|
|
|
|
HL | Hot Fill to Low Level | • | 2nd dot from left – cold spray valve |
|
|
|
|
HO | Hot Fill to Overflow | • | 3rd dot from left – hot fill valve |
|
|
|
|
HR | Hot Rinse | • | 4th dot from left – cold fill valve |
|
|
|
|
HS | High Speed Spin | • | 5th dot from left – low level fill reached |
|
|
|
|
HT | Heat (steam or electric) | • | 6th dot from left – high level fill reached |
|
|
|
|
M | Minutes (used when programming time) | PAUSE 5 | Paused during Cycle (see explanation in this |
|
|
| manual) |
|
|
|
|
MS | Medium Speed Spin |
|
|
|
|
|
|
Table 1
NOTE: For further explanation of problem indication displays, consult Test Procedure section of this manual.
10 | © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT | F232161 |