10 | Rapier Series Switch |
5.Browse to the GUI.
If you access the Internet through a proxy server, set your browser to bypass the proxy for the IP address you just assigned to the VLAN1 interface.
Point your web browser at the IP address of the VLAN interface.
6.Log in and set the password.
At the log in prompt, enter the log in name and password. Passwords are case sensitive.
User Name: manager
Password: friend
The system status page appears and you can now use the GUI to configure the switch.
To ensure configuration settings are saved correctly, use the GUI menus and buttons to navigate, not your browser’s buttons.
As a security precaution, change the password as soon as possible.
To change the password, select Management > Users from the sidebar menu. Select the Manager account and click Modify.
7.To access
Click on the Help Button [Help]. The Help button is located at the top of the sidebar menu or on any popup page.
System LEDs
System LEDs
LED | State | Function |
|
|
|
Power | Green | The switch is receiving power and the voltage |
|
| is within the acceptable range |
|
|
|
Fault | Red | The switch or management software is |
|
| malfunctioning |
|
|
|
| 1 flash | A switch fan has failed. (The LEDs will not |
|
| indicate an RPS fan failure.) |
|
|
|
| 3 flashes | If an RPS is connected, the switch’s PSU (Power |
|
| Supply Unit) has failed |
|
|
|
| 4 flashes | If RPS monitoring is enabled, the RPS PSU has |
|
| failed |
|
|
|
| 5 flashes | If RPS monitoring is enabled, an RPS is not |
|
| connected or is not operational |
|
|
|
