Allied Telesis AT-8088/SC, 48, 24, G6f manual Documentation and Tools CD-ROM, Swapping

Quick Install Guide 11

System LEDs

LED	State	Function
RPS1 (Redundant	Green	An RPS is connected to the switch
Power Supply)
In use2 (Rear panel)	Green	An NSM is installed, is receiving power, and is
		operational. The NSM and its PICs are not
		ready to be hot swapped
	Off	No NSM is installed, or the NSM is not installed
		correctly (the switch unit has not recognised
		the NSM)
Swap2 (Rear panel)	Green	The NSM and its PICs are ready to be hot
		swapped
	Off	The Hot Swap button must be pressed before
		the NSM or PICs can be hot swapped, or the
		software release does not support hot
		swapping3

1.DC models of the Rapier Switch do not have an RPS connector and the RPS LED will not function.

2.Not included on the Rapier 48, G6, G6F-SX/SC, G6F-LX/SC, or G6F-SX/MT-RJ.

3.Hot swapping is supported by Software Release 2.3.1 or later. AT-AR021 (S) BRI-S/T, AT-AR021 (U) BRI-U, and AT-AR023 SYN PICs can be hot swapped.

The Rapier Switch Hardware Reference has further troubleshooting information, including information on Switch Port and Uplink Module LEDs.

Documentation and Tools CD-ROM

The Documentation and Tools CD-ROM bundled with each Rapier Switch contains the complete Documentation Set for your switch and its expansion options, as well as tools for managing the switch. This includes:

■The Rapier Switch Statutory and Safety booklet, which provides safety and statutory information for the Rapier Switch and its expansion options.

■The Rapier Switch Hardware Reference, which provides detailed information on the hardware features of Rapier Switches.

■This Quick Install Guide.

■The Rapier Switch Software Reference, which provides detailed information on configuring the switch and its software.

■The Network Service Module Quick Install Guide, which outlines the procedure for installing an NSM; and the Network Service Module Hardware Reference, which provides detailed information on NSMs.

■The Port Interface Card Quick Install Guide, which outlines the procedure for installing PICs; and the Port Interface Card Hardware Reference, which provides detailed information on PICs.

■The Uplink Module Quick Install Guide, which outlines the procedure for installing an Uplink Module; and the Uplink Module Hardware Reference, which provides detailed information on Uplink Modules.

■AT-TFTP Server for Windows for downloading software releases.

■Adobe Acrobat Reader for viewing online documentation.

C613-04017-01 REV H