Allied Telesis AT-LX3811/x, 613-50550-00, AT-LX3800U specifications Specifications

Specifications

Item	Specification
Dimensions (H x W x L)	29.21 x 43.85 x 243.22 mm
	(1.15 x 1.71 x 9.57 in.)
Operating Temperature	0° C to 40° C
Storage Temperature	-20° C to 80° C
Relative Humidity	<85% non-condensing
Supply Voltage	+3.15 V - +3.45 V
Bit Rate	100 Mb/s - 2700 Mb/s
Optical Output Power	+1 dBm - +3 dBm
Receiver sensitivity (BER	-28 dBm (OC-48)
<10^-10 for OC rates, BER	-31 dBm (GbE)
<10^-12 for GbE)	-33 dBm (OC-12)
	-35 dBm (OC-3)
Receiver Optical Overload	-7 dBm

Electrical Safety and Emission Statement

This product meets the following standards.

U.S. Federal Communications Commission

Radiated Energy

Note: This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with this instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Note: Modifications or changes not expressly approved of by the manufacturer or the FCC, can void your right to operate this equipment.

Industry Canada

This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.

RFI Emissions EN 55022 Class A

Warning

In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.

Immunity EN 55024

Electrical Safety UL 1950 (CULUS), EN 60950 (TUV)

Laser Safety EN 60825 (Class 1)

Copyright © 2004 Allied Telesyn, Inc. All rights reserved. No part of this publication may be reproduced without prior written permission from Allied Telesyn, Inc. www.alliedtelesyn.com

AT-LX3811/x Multi-Service Line Card

Installation Guide

Overview

An AT-LX3811/x Multi-Service Line Card is designed for use in an AT-LX3800U Multi-Service Transport System. Each line card contains one optical SFP transceiver port. The line cards are hot swappable into and out of the system. Each line card can only be used in its dedicated slot.

	AT-LX3	811/8
	RDY
TRIB	TX
	RX		SYNC
			TX	LINE
	SFP		RX

The line card models, their corresponding wavelengths, and their slot position in the AT-LX3800U system are listed in the following table.

	Model	Wavelength	Slot Number
AT-LX3811/1		1470	1
AT-LX3811/2		1490	2
AT-LX3811/3		1510	3
AT-LX3811/4		1530	4
AT-LX3811/5		1550	5
AT-LX3811/6		1570	6
AT-LX3811/7		1590	7
AT-LX3811/8		1610	8
	Laser

Class 1 laser product.

Laser

Do not stare into the laser beam.

PN 613-50550-00 Rev. A

Specifications

Item	Specification
Dimensions (H x W x L)	29.21 x 43.85 x 243.22 mm
	(1.15 x 1.71 x 9.57 in.)
Operating Temperature	0° C to 40° C
Storage Temperature	-20° C to 80° C
Relative Humidity	<85% non-condensing
Supply Voltage	+3.15 V - +3.45 V
Bit Rate	100 Mb/s - 2700 Mb/s
Optical Output Power	+1 dBm - +3 dBm
Receiver sensitivity (BER	-28 dBm (OC-48)
<10^-10 for OC rates, BER	-31 dBm (GbE)
<10^-12 for GbE)	-33 dBm (OC-12)
	-35 dBm (OC-3)
Receiver Optical Overload	-7 dBm

Electrical Safety and Emission Statement

This product meets the following standards.

U.S. Federal Communications Commission

Radiated Energy

Note: This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with this instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Note: Modifications or changes not expressly approved of by the manufacturer or the FCC, can void your right to operate this equipment.

Industry Canada

This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.

RFI Emissions EN 55022 Class A

Warning

In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.

Immunity		EN 55024
Electrical Safety UL 1950 (CULUS), EN 60950 (TUV)
	Laser Safety EN 60825		(Class 1)

Copyright © 2004 Allied Telesyn, Inc. All rights reserved. No part of this publication may be reproduced without prior written permission from Allied Telesyn, Inc. www.alliedtelesyn.com

AT-LX3811/x Multi-Service Line Card

Installation Guide

Overview

An AT-LX3811/x Multi-Serivce Line Card is designed for use in an AT-LX3800U Multi-Service Transport System. Each line card contains one optical SFP transceiver port. The line cards are hot swappable into and out of the system. Each line card can only be used in its dedicated slot.

	AT-LX
	3811/8
	RDY
TRIB	TX
	RX	SYNC
		TX	LINE
	SFP	RX

The line card models, their corresponding wavelengths, and their slot position in the AT-LX3800U system are listed in the following table.

Model	Wavelength	Slot Number
AT-LX3811/1	1470	1
AT-LX3811/2	1490	2
AT-LX3811/3	1510	3
AT-LX3811/4	1530	4
AT-LX3811/5	1550	5
AT-LX3811/6	1570	6
AT-LX3811/7	1590	7
AT-LX3811/8	1610	8

Laser

Class 1 laser product. Do not stare into the laser beam.

Laser

Do not stare into the laser beam.

PN 613-50550-00 Rev. A