Allied Telesis AT-LX3800U Related Documents, Verifying Package Contents, Installing the Line Card

Related Documents

For details on the features and functions of your Allied Telesyn AT-LX3800U Multi-Service Transport System, refer to the following documents on our web site, www.alliedtelesyn.com:

•AT-LX3800U Multi-Service Transport System Installation and Maintenance Guide

(part number 613-50549-00)

•AT-S65 Management Software User’s Guide (part number 613-50604-00)

Verifying Package Contents

Make sure that the correct components are included in your package:

•AT-LX3811/x Multi-Service Line Card

•This installation guide

•Warranty card

5.Locate the left and right alignment guides in the slot.

SYNC	RDY
TX LINE	TX
RX	TRIB
	RX

138

Alignment Guides

6.Align the back edge of the line card with the left and right alignment guides.

7.Slide the card into the slot that corresponds to the line card number, until the faceplate is flush with the front.

Related Documents

For details on the features and functions of your Allied Telesyn AT-LX3800U Multi-Service Transport System, refer to the following documents on our web site,

www.alliedtelesyn.com:

•AT-LX3800U Multi-Service Transport System Installation and Maintenance Guide

(part number 613-50549-00)

•AT-S65 Management Software User’s Guide (part number 613-50604-00)

Verifying Package Contents

Make sure that the correct components are included in your package:

•AT-LX3811/x Multi-Service Line Card

•This installation guide

•Warranty card

5.Locate the left and right alignment guides in the slot.

SYNC	RDY
TX LINE	TX
RX	TRIB
	RX

138

Alignment Guides

6.Align the back edge of the line card with the left and right alignment guides.

7.Slide the card into the slot that corresponds to the line card number, until the faceplate is flush with the front.

If any item is missing or damaged, contact your Allied Telesyn sales representative for assistance.

Installing the Line Card

To install an AT-LX3811/x Line Card, perform the following procedure:

1.	Remove the AT-LX3811/x line card from its shipping
	package and store the package in a safe place. You
	must use the original package if you need to return the
	unit to Allied Telesyn.
2.	Select the slot in the AT-LX3800U chassis that

2
X3811/2
			3
			AT-
	SYNC		LX3811/3
SFP	TX	LINE	RDY					4
	RX
		TRIB	TX				AT-	LX3811/4
			RX	SYNC
				TX	LINE	RDY
				RX
					TRIB	TX
						RX			SYNC
									TX	LINE
									RX
					AT-
				RDY
			TRIB	TX
				RX				SYNC
								TX	LINE
						SFP		RX

5

	6
	AT-
	LX3811/6
	RDY
TRIB	TX
	RX	SYNC
		TX	LINE	RD
	SFP	RX
			TRIB	T
				R

139

If any item is missing or damaged, contact your Allied Telesyn sales representative for assistance.

Installing the Line Card

To install an AT-LX3811/x Line Card, perform the following procedure:

1.	Remove the AT-LX3811/x line card from its shipping
	package and store the package in a safe place. You
	must use the original package if you need to return the
	unit to Allied Telesyn.
2.	Select the slot in the AT-LX3800U chassis that
	corresponds to the number of the line card you want to

2
X3811/2
			3
			AT-
	SYNC		LX3811/3
SFP	TX	LINE	RDY					4
	RX	TRIB	TX				AT-	LX3811/4
			RX	SYNC
				TX	LINE	RDY
				RX
					TRIB	TX
						RX			SYNC
									TX	LINE
									RX
					AT
				RDY
			TRIB	TX
				RX				SYNC
								TX	LINE
						SFP		RX

5

		6
		AT-
		LX3811/6
	RDY
TRIB	TX
	RX	SYNC
		TX	LINE	RD
		RX	TRIB	T
				R

139

corresponds to the number of the line card you want to

install.

3. Remove any AT-LX3801 Blank Slot Cover from the

slot.

8.Use a Phillips head screwdriver to tighten the captive screws on the line card.

install.

3. Remove any AT-LX3801 Blank Slot Cover from the

slot.

8.Use a Phillips head screwdriver to tighten the captive screws on the line card.

Keep the blank slot cover in a safe area in case you

remove the line card. The blank slot cover protects the

fiber optic connectors on the backplane from becoming

dirty, and helps maintain proper air flow through the

chassis.

4. Remove the dust caps from the fiber optic connectors

at the back of the card and save for future use.

2
X3811/2
			3
			AT-
	SYNC		LX3811/3
								4
SFP	TX	LINE	RDY
	RX	TRIB	TX				AT-	LX3811/4
			RX	SYNC
				TX	LINE	RDY
			SFP	RX
					TRIB	TX
						RX		SYNC
								TX	LINE
								RX

		5
		AT-
		LX3811/5
	RDY				6
TRIB	TX			AT-	LX3811/6
	RX	SYNC
		TX	LINE	RDY
		RX
			TRIB	TX

RX	SYNC
	TX	LINE	RD
	RX
		TRIB	T
			R

Keep the blank slot cover in a safe area in case you

remove the line card. The blank slot cover protects the

fiber optic connectors on the backplane from becoming

dirty, and helps maintain proper air flow through the

chassis.

4. Remove the dust caps from the fiber optic connectors

at the back of the card and save for future use.

2
X3811/2
				3
				AT-
	SYNC			LX3811/3
								4
SFP	TX	LINE	RDY
	RX	TRIB	TX				AT-	LX3811/4
			RX	SYNC
				TX	LINE	RDY
				RX	TRIB	TX
						RX		SYNC
								TX	LINE
								RX

	5
	AT-
	LX3811/5
	RDY				6
TRIB	TX			AT-	LX3811/6
	RX	SYNC
		TX	LINE	RDY
	SFP	RX	TRIB	TX

RX	SYNC
	TX	LINE	RD
	RX	TRIB	T
			R

173

140

Note

Always tighten the captive screws to secure the line card to the chassis. This helps ensure that the fiber optic connectors at the back of the line card are securely connected to the backplane.

9.Repeat this procedure to install additional line cards.

For information about the line card LEDs, installing SFPs in the line card, and connecting fiber optic cables, refer to the AT-LX3800UMulti-Service Transport System Installation and Maintenance Guide.

173

140

Note

Always tighten the captive screws to secure the line card to the chassis. This helps ensure that the fiber optic connectors at the back of the line card are securely connected to the backplane.

9.Repeat this procedure to install additional line cards.

For information about the line card LEDs, installing SFPs in the line card, and connecting fiber optic cables, refer to the AT-LX3800UMulti-Service Transport System Installation and Maintenance Guide.