Patch | 11 |
Features in
Patch file details for Patch 86222-16 are listed in Table 5:
Table 5: Patch file details for Patch
Base Software Release File | |
|
|
Patch Release Date | |
|
|
Compressed Patch File Name | |
|
|
Compressed Patch File Size | 336952 bytes |
|
|
Patch
PCR: 02092 | Module: SWI | Network affecting: No |
The SET SWITCH L3 FILT command overwrote existing Layer 3 filters. If multiple filter entries existed, this command changed the most recent entry, rather than the one specified. These issues have been resolved. Also, the SET SWITCH L3 FILT command now allows for creation of multiple filter entries with the SETPRIORITY and SETTOS parameters. The Layer 3 filter protocol match now has no limit.
PCR: 02099 Module: DHCP | Network affecting: No |
A switch sometimes restarted if it was configured with static DHCP entries and was handling a large number of DHCP clients. This issue has been resolved.
Features in
Patch file details for Patch
Table 6: Patch file details for Patch
Base Software Release File | |
|
|
Patch Release Date | |
|
|
Compressed Patch File Name | |
|
|
Compressed Patch File Size | 336608 bytes |
|
|
Patch
PCR: 02015 Module: SNMP | Network affecting: No |
A fatal error occurred when an invalid SNMP message was received. This issue has been resolved.
PCR: 02020 | Module: SWI | Network affecting: No |
When disabling port mirroring the VLAN tagging configuration of other ports was corrupted. This issue has been resolved.
Patch