Allied Telesis 86222-21 Features in, Patch file details for Patch 86222-10 are listed in Table

Patch 86222-21 For Rapier Switches and AR800 Series Modular Switching Routers 17

PCR: 01288 Module: SWI Network affecting: No

When a switch port was forced to half duplex mode and the link partner was forced to full duplex mode, it was possible for the switch to enter a state where it was unable to transmit packets. This issue has been resolved.

Features in 86222-10

Patch file details for Patch 86222-10 are listed in Table 11.

Table 11: Patch file details for Patch 86222-10.

Base Software Release File	86s-222.rez
Patch Release Date	29-Nov-2001
Compressed Patch File Name	86222-10.paz
Compressed Patch File Size	295536 bytes

Patch 86222-10 includes all issues resolved and enhancements released in previous patches for Software Release 2.2.2, and the following enhancement:

PCR: 01264 Module: SWI Network affecting: No

Some switch chip register settings have been optimised to improve the provision of CoS with the newer revision of switching silicon.

Features in 86222-09

Patch file details for Patch 86222-09 are listed in Table 12.

Table 12: Patch file details for Patch 86222-09.

Base Software Release File	86s-222.rez
Patch Release Date	27-Nov-2001
Compressed Patch File Name	86222-09.paz
Compressed Patch File Size	295444 bytes

Patch 86222-09 includes all issues resolved and enhancements released in previous patches for Software Release 2.2.2, and the following enhancements:

PCR: 01189 Module: STP, SWI Network affecting: Yes

A new feature, STP forwarding, has been added. STP forwarding can be enabled and disabled using the commands:

ENABLE SWI STPFORWARD

DISABLE SWI STPFORWARD

When STP forwarding is enabled, all STP forwarding is ignored and all

BDPUs received on a port are forwarded on all other ports.

Patch 86222-21 for Software Release 2.2.2 C613-10319-00 REV T