Allied Telesis AT-2911LTX/LC, AT-2911LTX/SC, AT-2911LX/2LC, AT-2911LX/LC, AT-2911LX/SC, AT-2911SFP, AT-2911SFP/2, AT-2911STX/LC, AT-2911STX/SC, AT-2911SX/2LC, AT-2911SX/LC, AT-2911SX/SC, AT-2911T/2 Guidelines , Twisted pair copper port

Chapter 3: Modifying Advanced Properties

Overview

To modify the advanced properties of the AT-2911 adapter, you must

access Device Manager on your operating system, then go to each

advanced property page.

Guidelines Here are the guidelines to modifying the advanced properties:

To change the advanced property settings, you must have

Administrator privileges.

When you upgrade the driver software, the settings of the

advanced properties may change. Verify the settings after

upgrading the driver software.

Twisted paircopper port

In addition to the advanced properties listed on page 41, twisted pair

copper ports have the following properties:

Wake Up Capabilities

WOL Speed

The Wake Up Capabilities property enables the network adapter to wake

up from a low-power mode when it receives a network wake-up frame.

Two types of wake-up frames are available: Magic Packet and Wake Up

Frame.

The WOL Speed property allows you to set the speed at which the adapter

connects to a network while the adapter is in the Wake on LAN (WOL)

mode.

Allied Telesis Guidelines , Twisted pair copper port