In some cases where more than one switch has the same STP Bridge Priority value in a network, the switch with the higher MAC address would be elected as the STP root bridge. This issue has been resolved.
After a switch is operation for a period of time, it may stop forwarding traffic on some ports and does not provide link up/down indications for those ports. This issue has been resolved.
SNMP— Added support for SNMP trap when master stack unit is down (CQ 00114211 ATI 161).
rlpoe.mib— The issue with the incorrect module name has been resolved (CQ 118709 ATI 221).
Reauthentication— The issue with the PC beginning reauthentication after 30 seconds has been resolved (00117490).
NAP— The Network Access Protection (NAP) issue has been resolved (00117491).
LLDP— Operation MAU type in
LLDP— Resolved LLDP issue when there are more than 30
IGMP Snooping— The no free timer issue with the IGMPSNOOPP_timer_create command has been resolved (CQ 121102).
Web— The
Online Help— Issue with the device help has been resolved (CQ 119900).
SW2M: ABORT DATA exception has been resolved (CQ 122564).
History of New Features
The Dot1x Legacy Compliant feature is advanced 802.1x configuration enabling support for non- compliant 802.1x devices such as Windows XP SP2. See Table 1 for a description of the dot1x legacy command that was introduced in this release.
Table 1: New Command Description
CLI Command | Description |
|
|
dot1x | Use the dot1x |
| configuration command in multiple sessions mode |
| to enable the 802.1x switch to send periodic EAPOL |
| requests and identify frames according to the tx |
| timeout period. This is the default behavior. |
|
|
PN | 9 | Allied Telesis, Inc. |
