4 |
Selecting a Site
The switch can be installed in a standard
■Allows adequate airflow around the switch and its vents.
■Is free of dust and moisture.
■Will maintain an ambient temperature range of
■Has a reliable and earthed (grounded) power supply circuit, preferably dedicated and filtered.
■Does not expose cabling to sources of electrical noise, such as radio transmitters, broadband amplifiers, power lines, electric motors, and fluorescent fixtures.
■Allows easy access to the switch’s power and cable connections.
■Will allow all related network devices to be connected to the switch without exceeding maximum cable length limitations. See the
Installing the Switch
This equipment must be earthed.
Follow these steps to install the switch:
1.Read the safety information
For safety information, see the Safety and Statutory Information booklet. A copy of this booklet is supplied with each switch, and can also be found on the Documentation and Tools
2.Gather the tools and equipment you will need
If the switch is to be connected to a redundant power supply, you will need a redundant power supply unit and cable (see step 8).
To install the switch in a rack you will need screws and cage nuts to attach the brackets to your rack. These are supplied with the switch.
3.Choose a suitable site for the switch
Either a flat surface or 19 inch rack.
4.Unpack the switch
Verify the package contents. If any items are damaged or missing, contact your sales representative.
