Installation

Powering ON the Hub

Before using the 100Base-TX module, prepare Category 5 straight-through twisted-pair cable with RJ-45 plugs at both ends. When connecting the module directly to an end-node device (e.g., a workstation or file server), a bridge or router, run cable from the MDI-X port on the uplink module to the target device. However, when connecting the module to a compatible hub or switch, connect one end of the cable to the MDI port on the uplink module, and the other end to an MDI-X port on the target device (or vice versa). When inserting an RJ-45 plug, be sure the tab on the plug clicks into position to ensure that it is properly seated. Note that as a general rule, the length of any twisted-pair cable should not exceed 100 meters (328 feet).

Note

In the present design, the uplink port only can not be monitored or managed by Local Management Agent, Telnet Agent, RMON Agent, SNMP Agent, or Web- based Management.

1.Plug the power cord into the power socket at the rear of the hub, and the other end into a power outlet.

2.Check the LED marked Power ON the front panel to see if it is ON. The unit will automatically select the setting that matches the connected input voltage. Therefore, no additional adjustments are necessary when connecting it to any input voltage within the range marked on the rear panel.

3.The hub performs a self-diagnostic test upon power-on. (Note that this test takes about 10 seconds to complete.)

4.However, remember that the optional slide-in modules are not hot-swappable. Be sure the hub is powered OFF when installing or removing these modules.

5.A socket is provided on the back of the hub for a redundant power unit (RPU) which will supply power to the hub in the event that its internal power supply should fail. Refer to the manual provided with the RPU for further details.

12

Page 22
Image 22
Allied Telesis AT-FH812U-SW, AT-FH824U-SW manual Powering on the Hub

AT-FH812U-SW, AT-FH812U, AT-FH824U-SW, AT-FH824U specifications

The Allied Telesis AT-FH824U and AT-FH812U series possess outstanding features suitable for various network requirements. These models are designed to deliver reliable performance, security, and ease of management for modern networking environments.

The AT-FH824U is an 8-port Fast Ethernet switch, engineered to provide high-speed connectivity for small to medium-sized networks. It supports a variety of media types and has 24 Gigabit Ethernet ports, which allow for seamless integration with existing network infrastructures. The device employs a non-blocking architecture, ensuring that data packets are routed efficiently without bottlenecks. Each port can automatically negotiate speeds between 10/100 Mbps, making it versatile for various devices. The switch also provides advanced features such as VLAN support, enabling network segmentation for improved performance and enhanced security.

Similarly, the AT-FH824U-SW variant adds an important layer to network management with its smart features. This managed switch version allows network administrators to monitor and control traffic flow through simple GUI interfaces or command-line SNMP management. The integration of Quality of Service (QoS) capabilities ensures that critical applications receive priority bandwidth, enhancing overall network efficiency.

On the other hand, the AT-FH812U is a more compact model with 12 Fast Ethernet ports. Ideal for smaller office environments, it delivers reliable networking with the same level of performance as its larger counterparts. It also supports IEEE 802.1Q for VLAN tagging, providing improved network functionality and security. This switch can be mounted in a standard rack or placed on a desktop, adding to its versatility.

The AT-FH812U-SW incorporates managed functionality, allowing users to access advanced settings and configurations. With features such as loop prevention, broadcast storm control, and port mirroring, it offers the robustness needed for more complex networking scenarios.

Allied Telesis switches are built with energy-efficient technology, minimizing power consumption without compromising performance. Enhanced security protocols including port security and access control lists make these switches suitable for businesses focused on safeguarding their networks against unauthorized access.

Overall, the AT-FH824U, AT-FH824U-SW, AT-FH812U, and AT-FH812U-SW models offer a blend of technology and performance, catering to the diverse needs of modern network infrastructures. These switches deliver scalability, manageability, and security, making them an ideal choice for various networking applications.