AT-S105 Version 1.1.0 Software Release Notes
PN 613-001565 Rev A 3 Allied Telesis, Inc.
On the AT-FS750/48 switch, Flow Control is functional between ports 1 - 24 or between ports
25 - 50. It is not functional between a port in the first group and another port in the second
group.
Known Issues
The following issues were found in this release:
Flow Control does not operate properly on the AT-FS750/48 when the Egress Rate Limit
is < 1920 kbps.
Allied Telesis Inc. recommends that MAC Based Authentication and 802.1x Forced
Authorized mode not be configured simultaneously. If you do elect to implement this
configuration on a port, it may interfere with STP, RSTP, and/or EAP forwarding packets
being received or transmitted on that port.
Also, if this configuration is implemented on all ports simultaneously, the AT-S105 WEB
management interface may become inaccessible.
Features History
Version 1.0.0
Web-based interface
Basic Port Configuration
Dynamic Host Configuration Protocol (DHCP)
IP Access List
Port-based and tagged VLANs
Quality of Service (QoS) support
Port trunking
Port mirroring
Spanning Tree (STP) and Rapid Spanning Tree (RSTP)
IGMP Snooping supporting IGMP versions 1 and 2
Simple Network Management Protocol (SNMP) versions SNMPv1 and SNMPv2c
Storm Control
Static multicast addresses
802.1x Port-based Network Access Control (IEEE 802.1x)
Remote Authentication Dial In User Services (RADIUS) client
Destination MAC Filter
User-defined Power over Ethernet (PoE) on 12 PoE ports
TFTP and HTTP to upgrade the firmware image
Configuration File Upload/Download
Traffic, error, and history statistics
Control of LED ECO Mode
Ping Execution