
Quick Installation Guide
AT-TQ3600
Wireless Access Point
Installation and User’s Guides
This document contains an abbreviated version of the installation instructions for the
Safety and Electromagnetic Emissions Certificates
Standard | RoHs compliant |
|
Compliance | European Union RoHS (Directive 2011/65/EU of the European | |
| Parliament and of the Council of 8 June 2011 on the restriction of | |
| the use of certain hazardous substances in electrical and | |
| electronic equipment.) |
|
|
|
|
Certificates | CE | EAC |
| FCC/IC | KC |
| RCM | SRMC |
|
| |
|
|
|
Electromagnetic | EN 301 | EN 301 |
Compatibility (EMC) | EN 55022 | EN 55024 |
| EN | EN |
| EN | EN |
| EN | EN |
| EN | EN |
| AS/NZS CISPR 22 |
|
| FCC 47 CFR Part 15, Subpart B | |
|
| |
|
|
|
Medical (EMC) | EN |
|
|
|
|
Radio Equipment | EN 300 328 | EN 301 893 |
| AS/NZS 4268 | RSS210 |
| ||
| FCC 47 CFR Part 15, | FCC 47 CFR Part 15, |
| Subpart C | Subpart E |
| FCC part 2 |
|
|
|
|
Safety | EN | IEC |
|
| UL |
| UL 2043 (For | |
| Suitable for use in environmental air space in accordance with | |
| Section | |
| ||
| Part 1, CSA C22.1. |
|
|
|
|
*613-001862 Rev C* 613-001862 Rev. C
1
Installation Options
Table or desktop
Wall or ceiling
This quick installation guide explains how to install the device on a table or desktop. For instructions on how to install the device on a wall of ceiling, refer to the
Note:
The
The country code for the US model is preset and cannot be changed. Per FCC regulations, the country code setting for all WiFi products marketed in the US must be fixed to US operational channels only.
Physical Description
The
PWR |
|
|
SYS |
|
|
| 10M |
|
AT- | 100M | 2. |
| ||
TQ3600 |
| 4GHz |
| 5GHz |
3122
The LEDs on the top panel of the access point are described in this table.
|
| Table 1. LEDs |
|
|
|
LED | State | Description |
|
|
|
|
|
|
PWR | Solid | The unit is receiving DC power that is within the normal |
| Green | operating range. |
|
|
|
| Off | The power supply is not receiving power from either the |
|
| AC/DC power adapter or a PoE Ethernet switch. |
|
|
|
SYS | Amber | The access point is loading its firmware. |
|
|
|
| Off | The unit is operating normally. |
|
|
|
10M and | 10M: On | The Ethernet port is operating at 10 Mbps. |
100M | 100M: Off |
|
|
| |
|
|
|
| 10M: Off | The Ethernet port is operating at 100 Mbps. |
| 100M: On |
|
|
|
|
| 10M: On | The Ethernet port is operating at 1000 Mbps. |
| 100M: On |
|
|
|
|
2.4GHz | Green | The 2.4GHz radio is sending and receiving radio waves. |
|
|
|
5GHz | Green | The 5GHz radio is sending and receiving radio waves. |
|
|
|
You may turn off the LEDs with the management software.
2
These two figures identify the components of the access point.
CONSOLE
RESET
3101
1 | 2 | 3 |
3121
4 5
The components on the access point are described in this table.
Table 2. Access Point Components
| Component | Description |
|
|
|
|
|
|
1 | Holes for anti- | Refer to “Installing |
| theft devices |
|
|
|
|
2 | Console Port | The Console Port is for manufacturing purposes only. |
|
|
|
3 | Reset Button | The Reset button returns the parameter settings on the access |
|
| point to their default settings. |
|
|
|
4 | LAN Port | The |
|
| your wired network. It supports PoE. If you connect the port to an |
|
| Ethernet switch that supports PoE, you do not have to use the |
|
| power adapter to power the device. |
|
|
|
5 | DC Power | This connector is for the |
| Connector | may power the access point with PoE on the LAN port or the |
|
| power adapter. The power adapter must be ordered separately. |
|
|
|
You should review the safety precautions in the
The cable specifications for the LAN port are detailed in the
3