Alloy Computer Products POE100 Series

7. LED Description

The following table describes the LED’s located on the POE100 Series media

converter.

LED Colour Function

FX LNK/ACT Green Lit when fibre connection has link

Blinks when fibre data is present

FDX/COL Amber

Lit when full-duplex mode is active

Off when half-duplex is active

Blinks when collision is present

TP LNK/ACT Green Lit when Copper connection has link

Blinks when Copper data is present

TP 100 Green Lit when Copper speed is 100Mbps

Off when Copper speed is 10Mbps

PWR Green

Lit when +5V power is supplied

Green Lit when PoE power output is active

PoE PSE-TP Red Lit when PoE power output is disrupted

(In case of over temperature or over current )

4W Green Lit when PD Class Type is Class 1

7W Green Lit when PD Class Type is Class 2

15.4W Green Lit when PD Class Type is Class 0 or 3

8. DIP Switch Configuration

Fig. 10 Reset button and S1 – Bit 1, 2, 3, 4, 5, 6, Configuration and Settings

Reset : If S1-1, S1-2, S1-3, S1-4 or S1-5 status is

changed, please press this button for your

settings to take effect.

S1-1 TP Port Mode : AUTO(Default) or FORCE

S1-2 TP Port Speed : 100 or 10 when TP is at Force

S1-3 TP Port Duplex : FDX or HDX when TP is at Force

S1-4 LFP : LFP Enabled (Default) or Disabled

S1-5 Fibre Port Duplex : 100FDX (Default) or 100HDX

S1-6 POE ON/OFF : Enabled (Default) or Disabled