C |
|
| |
H |
|
| |
O |
| It is always best to plan the complete installation prior to attempt- | |
O |
| ||
ing to install any product. The routing of wires, power connections and | |||
S | |||
mounting locations should be planned first. As with any car stereo instal- | |||
I | |||
N | lation, all work performed should be checked thoroughly and carefully | ||
G | prior to the operation of the system. | ||
A |
| The placement of your Alphasonik enclosure within your vehicle | |
L |
| ||
will greatly affect the overall performance of your audio system. Avoid | |||
O | |||
areas that do not provide a flat, sturdy mounting surface. | |||
C | |||
|
| ||
A | NOTE: | Alphasonik strongly recommends that you operate your system at | |
T | |||
I | low volumes prior to the completed installation of your Alphasonik enclo- | ||
O | sure. This will allow a test of the speaker before securing it to its perma- | ||
N | nent location. | ||
| CAUTION: Make sure that all wiring is fully protected from cuts, tears | ||
| and possible wear. Any short circuit developing as a result could severely | ||
| damage the source unit or possibly the amplifier. Make sure all wires eas- | ||
| ily reach the amplifiers terminal with no stress on the wires or connectors. | ||
|
| MOUNTING: | |
| 1. | Confirm the mounting location by inspecting the area where the | |
|
| enclosure will be mounted. | |
| 2. | Before screwing anything double check where all wires are located | |
|
| and ran. Check underneith the vehicle for gas lines, brake lines, | |
and gas tank. If there is anything like that we suggest to find an other location to mount the enclosure.
5
