Manuals / Alpine / Car Audio and Video / Car Stereo System

Alpine CDE-101EM, CDE-103EBT, CDE-102E Information, Case of Difficulty, Basic, Radio, 26-EN

Models: CDE-103EBT CDE-101E CDE-102E CDE-101EM

1 34
Download 34 pages 53.95 Kb
Page 27
Image 27

Information

In Case of Difficulty

If you encounter a problem, please turn the power off, then on again. If the unit is still not functioning normally, please review the items in the following checklist. This guide will help you isolate the problem if the unit is at fault. Otherwise, make sure the rest of your system is properly connected or consult your authorized Alpine dealer.

Basic

No function or display.

•Vehicle’s ignition is off.

-If connected following instructions, the unit will not operate with the vehicle’s ignition off.

•Improper power lead (Red) and battery lead (Yellow) connections.

-Check power lead and battery lead connections.

•Blown fuse.

-Check the fuse of the unit; replace with the proper value if necessary.

•Internal micro-computer malfunctioned due to interference noise etc.

-Press the RESET switch with a ballpoint pen or other pointed article.

Radio

Unable to receive stations.

•No antenna or open connection in cable.

-Make sure the antenna is properly connected; replace the antenna or cable if necessary.

Unable to tune stations in the seek mode.

•You are in a weak signal area.

-Make sure the tuner is in the DX mode.

•If the area you are in is a primary signal area, the antenna may not be grounded and connected properly.

-Check your antenna connections; make sure the antenna is properly grounded at its mounting location.

•The antenna may not be the proper length.

-Make sure the antenna is fully extended; if broken, replace the antenna with a new one.

Broadcast is noisy.

•The antenna is not the proper length.

-Extend the antenna fully; replace it if it is broken.

•The antenna is poorly grounded.

-Make sure the antenna is grounded properly at its mounting location.

CD

CD Player not functioning.

•Out of operating temperature range +50°C (+120°F) for CD. - Allow the vehicle’s interior (or trunk) temperature to cool.

CD playback sound is wavering.

•Moisture condensation in the CD Module.

-Allow enough time for the condensation to evaporate (about 1 hour).

CD insertion not possible.

•A CD is already in the CD player.

-Eject the CD and remove it.

•The CD is being improperly inserted.

-Make sure the CD is being inserted following instructions in the CD Player Operation section.

Unable to fast forward or backward the CD.

•The CD has been damaged.

-Eject the CD and discard it; using a damaged CD in your unit can cause damage to the mechanism.

CD playback sound skips due to vibration.

•Improper mounting of the unit.

-Securely re-mount the unit.

•The disc is very dirty.

-Clean the disc.

•The disc has scratches.

-Change the disc.

•The pick-up lens is dirty.

-Do not use a commercially available lens cleaner disc. Consult your nearest Alpine dealer.

CD playback sound skips without vibration.

•The disc is dirty or scratched.

- Clean the disc; damaged disc should be replaced.

Error displays (built-in CD player only).

•Mechanical error.

-Press . After the error indication disappears, insert the disc again. If the above-mentioned solution does not solve the

problem, consult your nearest Alpine dealer.

CD-R/CD-RW playback not possible.

•Close session (finalisation) has not been performed. - Perform finalisation and attempt playback again.

MP3/WMA/AAC

MP3, WMA or AAC is not played back.

•Writing error occurred. The MP3/WMA/AAC format is not compatible.

-Make sure the MP3/WMA/AAC has been written in a supported format. Refer to “About MP3/WMA/AAC” (pages 10-11), then rewrite in the format supported by this device.

26-EN

Page 26 Page 28
Page 27
Image 27
Alpine CDE-101EM, CDE-103EBT, CDE-102E owner manual Information, Case of Difficulty, Basic, Radio, 26-EN
Page 26 Page 28

CDE-103EBT, CDE-101E, CDE-102E, CDE-101EM specifications

Alpine is renowned for its high-quality car audio systems, and the CDE series of head units represents a perfect blend of advanced technology and user-centric features. The CDE-101EM, CDE-102E, CDE-101E, and CDE-103EBT are popular models that cater to various needs, offering a range of functionalities to enhance the in-car experience.

The CDE-101EM stands out with its sleek design and intuitive user interface. It supports a variety of media formats, allowing users to enjoy music from CDs, USB devices, and even Bluetooth-enabled devices. A notable feature is its 18 preset EQ settings, which enable personalized audio tuning. This model is also equipped with a high-quality built-in amplifier, ensuring clear sound at any volume level, and comes with a front auxiliary input for additional connectivity.

The CDE-102E builds on the strengths of its predecessor, offering enhanced Bluetooth connectivity that allows for hands-free calling and audio streaming from smartphones. Its 3-band parametric equalizer provides deeper control over sound, allowing for adjustments to the bass, midrange, and treble to match personal preferences and vehicle acoustics. One highlight of the CDE-102E is its compatibility with Android and iOS devices, streamlining the user experience for smartphone integration.

The CDE-101E is designed for users seeking a straightforward audio solution without compromising on quality. It features a digital AM/FM tuner, enabling access to a vast array of radio stations, along with a large, easy-to-read display that shows track information and radio settings. The user-friendly controls are ideal for on-the-road adjustments, making every journey an enjoyable audio experience.

Lastly, the CDE-103EBT further expands on connectivity options with additional USB ports and advanced Bluetooth features. It includes built-in support for various audio streaming apps, enabling direct access from the head unit. Additionally, it comes with a sophisticated AM/FM tuner with RDS capability, allowing for a richer radio listening experience. The model's expandable architecture means that users can easily add external amplifiers or subwoofers, tailoring the system to their audio desires.

All in all, the Alpine CDE series models—CDE-101EM, CDE-102E, CDE-101E, and CDE-103EBT—each offer a variety of features that enhance the driving experience through superior sound quality and extensive connectivity options. Whether through Bluetooth streaming, USB connectivity, or a classic CD player, these models provide a perfect fusion of technology and convenience.